Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 5600 CL46 2Rx4 1.1V ECC RDIMM Supermicro H14DSG-OD memory upgrade

SKU CH-V47Y-C6F0C

64GB DDR5 5600 ECC registered RDIMM with 2Rx4 rank and CL46 timing, validated for the Supermicro H14DSG-OD motherboard

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB

Zobraziť ďalších 30 konfigurácií
  • Exact DDR5-5600 CL46 1.1V spec ensures full-speed recognition
  • Registered ECC 2Rx4 architecture prevents silent data corruption
  • 288-pin RDIMM form factor matches Supermicro H14DSG-OD slot requirements
  • 64GB single-module capacity enables dense memory configurations
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Exact-Match DDR5 ECC RDIMM Upgrade

This 64GB DDR5 5600 module delivers the precise CL46 timing, 1.1V voltage and 2Rx4 registered ECC profile that the Supermicro H14DSG-OD memory controller expects. The 288-pin RDIMM form factor matches the board's slot requirement exactly, so the system recognises the full capacity and runs at the rated PC5-44800 speed without manual tuning.

Suited for Populated Server Builds

The registered architecture offloads the memory controller, allowing every supported slot to be filled at full capacity while on-die ECC corrects single-bit errors before they reach production workloads. Builders needing unbuffered UDIMMs, non-ECC modules or a different pin count should look elsewhere, as this part will not fit or function in those configurations.

Drop-In Slot Installation

Insert the module into the motherboard's DDR5 RDIMM slots following the population order in the H14DSG-OD manual; no extra cables, adapters or cooling hardware are required. The registered design frees the memory controller from electrical loading, keeping signal integrity stable across a fully populated chassis.

Prednosti

  • Exact DDR5-5600 CL46 1.1V spec ensures full-speed recognition
  • Registered ECC 2Rx4 architecture prevents silent data corruption
  • 288-pin RDIMM form factor matches Supermicro H14DSG-OD slot requirements
  • 64GB single-module capacity enables dense memory configurations
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does my Supermicro H14DSG-OD motherboard need a specific BIOS revision before installing this 64GB DDR5 5600 CL46 RDIMM?

The motherboard manual lists the required BIOS version for 5600 MT/s RDIMM support; update to that release or newer before adding the module.

Will this 2Rx4 registered ECC DDR5 module work in the same channels as my existing 1Rx8 DDR5 RDIMMs on the H14DSG-OD?

Mixed-rank populations are allowed if the manual's population table lists the combination; follow the slot order shown for 2Rx4 and 1Rx8 modules.

How can I confirm the module is running at DDR5 5600 with CL46 timings after installation?

Check the BIOS memory information screen or run dmidecode; both should report 5600 MT/s, CL46, 1.10 V and registered ECC status.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.