NEMIX RAM
NEMIX RAM 768GB (16 x 48GB) DDR5 6400 ECC Registered RDIMM Kit for Supermicro H14DST-FL memory upgrade
A 768GB kit of 16 DDR5 6400 ECC registered RDIMMs built for the Supermicro H14DST-FL server board
- Capacity768GB (16 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 768 GB total capacity from sixteen 48 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors on the fly
- 288-pin RDIMM form factor matches Supermicro H14DST-FL slots
- Built with major OEM Samsung, Micron, Hynix chips
Server memory kit
This 768GB kit contains sixteen 48GB DDR5 6400 Registered ECC RDIMMs built for the Supermicro H14DST-FL motherboard. Each module runs at 1.1V with CL52 latency and a 2Rx8 organisation. The registered design lets the memory controller drive a fully populated system without signal degradation. It targets administrators who need maximum capacity on this specific platform.
Pre-install checks
Confirm the H14DST-FL manual lists 48GB RDIMMs in a sixteen-module population and note the required slot-filling sequence. Verify the BIOS revision supports the full 768GB capacity at DDR5 6400 speed. Ensure the chassis provides 288-pin DDR5 RDIMM slots and that no UDIMM or SODIMM modules are currently installed.
Build integration
The kit fills every DIMM slot on the board, delivering the maximum registered ECC capacity the platform accepts. Registered buffering reduces electrical load on the memory controller, while ECC corrects single-bit errors during operation. No heat spreaders are fitted, so airflow across the modules must be maintained by the server's cooling design. The 1.1V operating voltage matches the board's DDR5 specification.
Prednosti
- 768 GB total capacity from sixteen 48 GB modules
- DDR5 6400 speed with CL52 latency at 1.1 V
- Registered ECC design corrects single-bit errors on the fly
- 288-pin RDIMM form factor matches Supermicro H14DST-FL slots
- Built with major OEM Samsung, Micron, Hynix chips
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K16 |
| Capacity | 768GB (16 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 768GB 16X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
What does the kit contain and is anything else needed for installation?
The kit contains sixteen 48 GB DDR5 6400 registered ECC RDIMMs, totalling 768 GB. No additional memory parts are required; install the modules into the Supermicro H14DST-FL motherboard following its population rules.
How do I decide between this 768 GB kit and a smaller capacity for the H14DST-FL?
Choose the 768 GB kit when the workload needs the maximum supported memory and the board's memory controller can address sixteen 2Rx8 registered modules at the rated 6400 MT/s speed.
What does the 6400 MT/s rating mean once the modules are installed in the server?
The memory controller will run the kit at 6400 MT/s with CL52 latency at 1.1 V, delivering the full PC5-51200 bandwidth across all sixteen slots when populated per the motherboard's guidelines.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.



