Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR5 4800 PC5-38400 CL40 1Rx8 1.1V 288-Pin UDIMM Supermicro X14SAE memory upgrade

SKU CH-9CD2-NG1RY

An 8 GB DDR5 4800 module built to the exact rank, voltage and timing the Supermicro X14SAE motherboard expects

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 8GB

  • 8GB DDR5-4800 adds responsive capacity for everyday workloads
  • CL40 timing at 1.1V matches the board's native memory profile
  • 1Rx8 single-rank layout installs in any supported DIMM slot
  • Major OEM Samsung Micron Hynix chips tested for stable operation
  • 288-pin UDIMM form factor fits the Supermicro X14SAE exactly

Supermicro X14SAE DDR5 Upgrade

This 8 GB DDR5 module is built for the Supermicro X14SAE motherboard. It delivers 4800 MT/s speed at 1.1 V with CL40 timing in a 288-pin UDIMM form factor. The single-rank 1Rx8 design matches the board's memory-controller expectations for immediate recognition at full capacity.

System builders populating Supermicro X14SAE boards

The non-ECC unbuffered layout suits desktop and workstation configurations that do not require error correction. Buyers needing registered or ECC modules for server validation should look elsewhere. This kit contains a single 8 GB stick, so systems requiring multi-channel population will need additional units.

1Rx8 CL40 DDR5-4800 specification

The 1Rx8 rank structure and CL40 latency are the decisive parameters for stable operation on the X14SAE platform. Major OEM chips from Samsung, Micron, or Hynix are tested at the rated 1.10 V and 4800 MT/s. Verify your manual for approved DIMM population order before installation.

Prednosti

  • 8GB DDR5-4800 adds responsive capacity for everyday workloads
  • CL40 timing at 1.1V matches the board's native memory profile
  • 1Rx8 single-rank layout installs in any supported DIMM slot
  • Major OEM Samsung Micron Hynix chips tested for stable operation
  • 288-pin UDIMM form factor fits the Supermicro X14SAE exactly

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will my Supermicro X14SAE motherboard accept this 288-pin DDR5 UDIMM at 4800 speed?

Yes, the module matches the board's required 288-pin DDR5 UDIMM form factor and 4800 PC5-38400 specification for proper recognition.

Can I keep my existing DDR5 memory and add this 8GB 1Rx8 CL40 module without issues?

Mixing is possible when speeds and timings align; the board will run all modules at the lowest common speed and latency.

How do I confirm the RAM is running at 4800 PC5-38400 with CL40 after installation?

Check the BIOS memory information or a tool like CPU-Z to verify the operating frequency shows 4800 MT/s and CAS latency reads 40.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.