Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green printed circuit board DDR5 RDIMM module with black memory chips no heat spreader 288 pin edge connector

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-F2JX-6QR5G

96 GB DDR5-6400 ECC RDIMM with CL52 latency and 1.1 V operation, validated for Supermicro H13DSH servers

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-6400 CL52 1.1V 2Rx4 RDIMM match for full-speed recognition
  • 96GB Registered ECC capacity with on-the-fly single-bit error correction
  • Verified 288-pin fitment for Supermicro H13DSH motherboard population rules
  • Registered buffer offloads controller for stable fully-populated operation
  • Lifetime replacement warranty with free US-based technical support

96 GB DDR5-6400 ECC RDIMM upgrade

This 96 GB DDR5-6400 CL52 registered ECC module is built for the Supermicro H13DSH motherboard. It runs at 1.1 V with a 2Rx4 rank layout and 288-pin RDIMM form factor so the board recognises the full capacity at rated speed.

Server builders needing registered ECC memory

It suits administrators populating every slot on an H13DSH platform where registered ECC stability is required. It will not work in systems that accept only unbuffered UDIMMs or SODIMMs or that lack DDR5 RDIMM support.

CL52 latency at 6400 MT/s

The module operates at CL52 latency at the DDR5-6400 (PC5-51200) data rate with 1.1 V supply voltage. This timing is what the H13DSH memory controller expects for full-speed operation without down-clocking.

Prednosti

  • Exact DDR5-6400 CL52 1.1V 2Rx4 RDIMM match for full-speed recognition
  • 96GB Registered ECC capacity with on-the-fly single-bit error correction
  • Verified 288-pin fitment for Supermicro H13DSH motherboard population rules
  • Registered buffer offloads controller for stable fully-populated operation
  • Lifetime replacement warranty with free US-based technical support

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Otázky k tomuto produktu

Should I pick the 96GB DDR5 6400 CL52 2Rx4 kit or a different capacity for the Supermicro H13DSH?

The 96GB kit is a single 2Rx4 Registered ECC RDIMM rated at DDR5 6400 with CL52 at 1.10V. Verify your motherboard manual for maximum capacity per slot and approved population order before choosing a different size.

What does the DDR5 6400 rating deliver once the module is installed in the H13DSH?

The module runs at DDR5 6400 with CL52 latency and 1.10V on the H13DSH when the board's memory controller supports that speed and the DIMM is populated according to the manual.

What does the 288-pin RDIMM interface mean for compatibility and speed limits?

The 288-pin Registered RDIMM form factor fits only RDIMM slots on the H13DSH. The DDR5 6400 (PC5-51200) rating is the maximum supported data rate; actual speed follows the board's memory controller and population rules.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.