Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 RDIMM modules with black chips, no heat spreader, 288-pin, 128GB each

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 256GB (2x128GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-20HF-W6E05 MPN CSE-GS7A-000NBP3

256 GB dual-module DDR5 ECC registered server memory kit running at 4800 MT/s with CL40 latency for Supermicro workstations

  • Capacity256GB (2 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity with two 128 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400
  • ECC registered RDIMM protects data integrity in servers
  • 1 V operating voltage reduces power draw
  • Validated for Supermicro SuperWorkstation SYS-751A-I

Target System Compatibility

This 256GB DDR5 kit is built specifically for the SuperMicro SuperWorkstation SYS-751A-I and Super X13DAI-T platforms. It suits IT professionals and organisations that need registered ECC memory validated for those exact workstation and server models.

Installation Notes

The modules use the standard 288-pin DDR5 RDIMM form factor and install in minutes by seating them in the motherboard DIMM slots. Because each stick is a 128GB 4Rx4 registered module, the platform must support that rank configuration and registered operation; otherwise the system will not post.

Decisive Specification

The kit delivers 256GB total capacity as two 128GB modules running at DDR5 4800 with CL40 latency at 1.10V. If your workload requires a different speed, voltage, rank layout or non-ECC memory, this part will not meet that requirement.

Prednosti

  • 256 GB total capacity with two 128 GB modules
  • DDR5 4800 MT/s speed rated at PC5-38400
  • ECC registered RDIMM protects data integrity in servers
  • 1 V operating voltage reduces power draw
  • Validated for Supermicro SuperWorkstation SYS-751A-I

Špecifikácie

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K2
Capacity256GB (2 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (2X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Otázky k tomuto produktu

How can I confirm the 256GB DDR5 4800 kit is running at CL40 with ECC active after installation?

Enter the BIOS or use a hardware-info utility such as CPU-Z and verify the reported speed shows 4800 MT/s, CAS latency 40, voltage 1.10 V and that ECC is listed as enabled for each 128GB module.

What exactly ships in the box and do I need any extra brackets or cables?

The package contains two 128GB 288-pin DDR5 RDIMM modules (256GB total); no heat spreaders, brackets, cables or tools are included or required for installation.

Which capacity version should I choose for a Supermicro SYS-751A-I workstation that supports 4Rx4 registered DIMMs?

This 256GB kit (2×128GB, 4Rx4, PC5-38400, CL40, 1.10 V) matches the workstation's qualified DDR5 RDIMM specification; select it when you need the maximum two-module capacity.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.