Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green 288-pin DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 256GB (4x64GB) 4800MHz ECC Registered RDIMM 2Rx4 CL40 1.1V Supermicro H13DSG-O-CPU

SKU CH-MMBP-BGNVB

256 GB registered ECC DDR5 kit with four 64 GB modules running at 4800 MHz CL40 1.1 V, validated for Supermicro H13DSG-O-CPU motherboards

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Zobraziť ďalších 30 konfigurácií
  • 256 GB total capacity lets you run large workloads on the Supermicro H13DSG-O-CPU
  • Registered ECC architecture offloads the controller and corrects single-bit errors for production stability
  • DDR5 4800 MT/s speed delivers rated bandwidth at 1.1 V for efficient server operation
  • 2Rx4 288-pin RDIMM form factor matches the board's memory population rules exactly
  • Four 64 GB modules populate every slot at full capacity without downclocking

Exact-Match Server Upgrade

This NEMIX RAM kit delivers 256GB across four 64GB DDR5 modules built to the exact rank, voltage and timing the Supermicro H13DSG-O-CPU motherboard expects. Registered ECC RDIMM architecture ensures every slot runs fully populated at the rated 4800MHz speed with CL40 latency and 1.1V operation. The 2Rx4 organisation matches the board's memory controller requirements for reliable recognition at full capacity.

Who This Suits And Who Should Look Elsewhere

System administrators expanding a Supermicro H13DSG-O-CPU platform to its maximum supported memory with validated registered ECC modules will find this kit fits the board's population rules. Buyers who need unbuffered UDIMM or SODIMM form factors cannot use these 288-pin RDIMMs in workstation or laptop slots. Anyone requiring a different total capacity or speed grade should consult the motherboard manual for approved configurations before purchasing.

Sustained Load Behaviour

Registered buffering offloads the memory controller so all four slots maintain stability when fully populated under continuous enterprise workloads. ECC circuitry detects and corrects single-bit errors on the fly preventing silent data corruption during extended compute tasks. The 1.1V operating voltage keeps power draw consistent across long-running virtualisation, database or HPC sessions without thermal throttling from the memory subsystem.

Prednosti

  • 256 GB total capacity lets you run large workloads on the Supermicro H13DSG-O-CPU
  • Registered ECC architecture offloads the controller and corrects single-bit errors for production stability
  • DDR5 4800 MT/s speed delivers rated bandwidth at 1.1 V for efficient server operation
  • 2Rx4 288-pin RDIMM form factor matches the board's memory population rules exactly
  • Four 64 GB modules populate every slot at full capacity without downclocking

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Which motherboard must I already have for this 256GB DDR5 4800MHz ECC Registered RDIMM kit to work?

The kit is validated for the Supermicro H13DSG-O-CPU motherboard and requires that board's 288-pin RDIMM slots and memory-population rules.

Will these 2Rx4 1.1V modules run correctly if I keep older DDR5 RDIMMs of a different rank or voltage in the same server?

Mixing ranks or voltages is not supported; the motherboard's population rules require identical 2Rx4 1.1V modules in each channel for stable operation.

How can I confirm the full 256GB capacity and CL40 timing are active after installation?

Enter the BIOS or use a hardware-inventory tool; both should report 256GB total, DDR5-4800 speed, CL40 latency, and ECC Registered status for every slot.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.