Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 128GB 8x16GB CL40 1Rx8 ECC RDIMM MZ33-CP1 memory upgrade

SKU CH-BSDK-62MC0

Eight 16 GB DDR5 RDIMMs provide 128 GB of registered ECC memory at 4800 MT/s, CL40, 1.1 V for the GIGABYTE MZ33-CP1 motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Zobraziť ďalších 18 konfigurácií
  • 128 GB capacity with eight 16 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5-38400 for fast data throughput
  • Registered ECC design with 1Rx8 organisation corrects single-bit errors automatically
  • 1 V operation and CL40 latency match the board's memory controller specifications
  • 288-pin RDIMM form factor verified compatible with GIGABYTE MZ33-CP1 motherboard

128GB DDR5 ECC RDIMM Kit

This 128GB kit contains eight 16GB DDR5-4800 registered ECC modules built for the GIGABYTE MZ33-CP1 motherboard. Each stick runs at 1.1V with CL40 timing in a 288-pin RDIMM form factor. The registered design lets the memory controller drive a full eight-slot population without signal degradation. It targets administrators who need maximum capacity on this specific platform.

Replaces Smaller RDIMM Sets

Upgrading from a partial kit or lower-density modules is worthwhile when the workload demands the full 128GB ceiling and the board's qualified vendor list matches this part number. The jump makes sense if the current configuration leaves slots empty or forces the controller to run at reduced speed. It is not for systems that only accept unbuffered UDIMMs or SODIMM form factors.

Handles Full-Population Server Loads

Eight ranks of 1Rx8 DDR5-4800 deliver 128GB of error-correcting capacity for virtualization hosts, database buffers and compute nodes that saturate every DIMM slot. Headroom ends at the board's maximum supported density and the DDR5-4800 data rate; workloads needing higher bandwidth or larger per-module densities will exceed this kit.

Prednosti

  • 128 GB capacity with eight 16 GB modules for high-density server workloads
  • DDR5 4800 speed rated at PC5-38400 for fast data throughput
  • Registered ECC design with 1Rx8 organisation corrects single-bit errors automatically
  • 1 V operation and CL40 latency match the board's memory controller specifications
  • 288-pin RDIMM form factor verified compatible with GIGABYTE MZ33-CP1 motherboard

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 288-pin DDR5 RDIMM modules fit the GIGABYTE MZ33-CP1 motherboard DIMM slots?

Yes, the kit uses the exact 288-pin Registered DDR5 form factor required by the MZ33-CP1, so each of the eight 16 GB modules seats directly in the board's DDR5 RDIMM slots.

What is the correct installation order for the eight 1Rx8 modules on the MZ33-CP1?

Populate all eight slots following the motherboard manual's specified population sequence; the kit is validated for full-capacity operation when installed in that order.

Do the modules need a heat spreader or active cooling for long-term operation?

The modules ship without a heat spreader and run at the standard 1.10 V; adequate chassis airflow over the bare DRAM is sufficient for normal server workloads.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.