Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 RDIMM modules, no heat spreaders, gold edge connectors

NEMIX RAM

NEMIX RAM DDR5 5600 256GB 2Rx4 ECC RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-3R9G-P8QNY

256 GB (2 × 128 GB) DDR5 5600 ECC RDIMM kit, 2Rx4 registered at 1.1 V CL46, validated for Supermicro H13SSL-N motherboards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Zobraziť ďalších 24 konfigurácií
  • 256 GB capacity from two 128 GB modules lets you fully populate supported Supermicro H13SSL-N slots
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for memory-intensive server workloads
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the board's voltage requirement so every DIMM runs at its specified frequency
  • Exact 288-pin RDIMM form factor verified for Supermicro H13SSL-N ensures physical and electrical compatibility

256 GB DDR5-5600 ECC RDIMM kit for Supermicro

This 256 GB kit contains two 128 GB DDR5-5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSL-N memory controller expects. It targets administrators who need full-capacity population on that specific server board without compatibility guesswork.

Registered ECC architecture and 288-pin form factor

The registered design offloads the memory controller so every slot runs fully populated at the rated 5600 MT/s, while on-die ECC corrects single-bit errors before they reach production workloads. The 288-pin RDIMM form factor matches the board's required slot type and population rules, and the modules operate at 1.1 V with CL46 latency.

Replaces partial or mismatched DDR5 populations

Install this kit when the server currently runs fewer modules, mixed ranks or slower speeds that limit total capacity or introduce stability risk. The jump is worth it when the workload demands the full 256 GB at the board's native DDR5-5600 rate with registered ECC integrity.

Prednosti

  • 256 GB capacity from two 128 GB modules lets you fully populate supported Supermicro H13SSL-N slots
  • DDR5 5600 speed with CL46 latency delivers rated bandwidth for memory-intensive server workloads
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the board's voltage requirement so every DIMM runs at its specified frequency
  • Exact 288-pin RDIMM form factor verified for Supermicro H13SSL-N ensures physical and electrical compatibility

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What DDR5 speed and PC5 rating does this 256GB kit run at?

This kit operates at DDR5 5600 with a PC5-44800 rating, so the memory controller sees the full 5600 MT/s data rate when all slots are populated.

What physical slot and form factor does the Supermicro H13SSL-N require for these modules?

The board takes 288-pin DDR5 RDIMMs; each 128GB module in this kit matches that exact registered form factor and will not fit UDIMM or SODIMM slots.

In what order should the two 128GB RDIMMs be installed on the H13SSL-N?

Consult the motherboard manual for the approved DIMM population sequence; the board's memory rules dictate which channels fill first for full 256GB recognition.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.