Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Eight green DDR5 RDIMM sticks in a row, gold contacts visible, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 256GB 8x32GB ECC RDIMM CL46 1.1V Supermicro H14DSH memory upgrade

SKU CH-FT3E-Q7P6C

A 256 GB DDR5 ECC registered server memory kit of eight 32 GB modules at 5600 MHz, CL46, 1.1 V, validated for the Supermicro H14DSH motherboard

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 256GB 8X32GB

Zobraziť ďalších 30 konfigurácií
  • 256 GB total capacity from eight 32 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high-throughput data paths
  • CL46 CAS latency at 1.1 V balances low power with responsive timing
  • Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
  • Verified compatibility with Supermicro H14DSH motherboard ensures correct fit and recognition

Exact-match DDR5-5600 ECC RDIMM kit

This 256 GB kit consists of eight 32 GB DDR5-5600 registered ECC modules built to the precise rank, voltage and timing the Supermicro H14DSH memory controller expects. Each 288-pin RDIMM runs at 1.1 V with CL46 latency and 2Rx8 organisation, so the server recognises the full capacity and operates at rated speed. It is intended for administrators upgrading or fully populating that specific platform.

Verify population rules and slot order

Server and motherboard memory support varies by model, so consult the system or motherboard manual for supported capacities, approved DIMM population order and installation steps before ordering. The board requires 288-pin registered RDIMMs, not UDIMM or SODIMM form factors, and the kit matches that requirement exactly. Confirming the correct slot sequence ensures every module is detected and runs without configuration errors.

Sustained stability under full load

Registered architecture offloads the memory controller, allowing all slots to remain fully populated at full capacity during continuous operation. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots from reaching production workloads. The modules operate at the standard 1.1 V without a heat spreader, relying on server chassis airflow for thermal management during extended duty cycles.

Prednosti

  • 256 GB total capacity from eight 32 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high-throughput data paths
  • CL46 CAS latency at 1.1 V balances low power with responsive timing
  • Registered ECC RDIMM design corrects single-bit errors and stabilises fully populated slots
  • Verified compatibility with Supermicro H14DSH motherboard ensures correct fit and recognition

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K8
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 8X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the 256GB 8x32GB DDR5 5600 kit include everything needed for the Supermicro H14DSH or must I buy extra modules?

The package contains eight 32GB DDR5 5600 CL46 1.1V 2Rx8 registered ECC RDIMMs for a total of 256GB; no additional modules are required to reach that capacity.

Should I choose this 256GB kit or a smaller capacity for my Supermicro H14DSH?

Select the 256GB 8x32GB kit when your workload needs the full 256GB at DDR5 5600 with registered ECC; a smaller kit would reduce total capacity and may not fill all eight slots per the board's population rules.

What does the DDR5 5600 CL46 1.1V rating mean once the modules are installed in the H14DSH?

The modules will run at 5600 MT/s with CAS latency 46 at 1.1V, delivering PC5-44800 bandwidth while registered ECC operation maintains stability across all eight populated slots.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.