BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278333BTC
Skladom
NEMIX RAM
NEMIX RAM DDR5 64GB 4x16GB 6400 CL52 1.1V ECC RDIMM Supermicro H14SHM memory upgrade
64 GB kit of four 16 GB DDR5 6400 CL52 1.1 V ECC registered RDIMMs validated for the Supermicro H14SHM motherboard
- Capacity64GB (4 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 64 GB total capacity from four 16 GB modules for full server utilisation
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors
- Exact 288-pin form factor verified for Supermicro H14SHM motherboard compatibility
- Built with major OEM Samsung, Micron or Hynix chips for enterprise stability
64GB DDR5 ECC RDIMM Kit for Supermicro H14SHM
This 64GB kit contains four 16GB DDR5 Registered DIMMs built for the Supermicro H14SHM motherboard. Each module runs at 6400 MT/s with a CL52 latency at 1.1V. The Registered ECC design matches the board's 288-pin RDIMM slots and population rules. It is not for systems that require unbuffered UDIMMs or SODIMM form factors.
Sustained Load Stability with Registered ECC
The Registered architecture buffers address and command signals so the memory controller stays stable when all four slots are populated at the rated 6400 speed. ECC detects and corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The 1.1V operation keeps power draw consistent under continuous load. This kit is not for platforms that cannot enable Registered ECC modes in firmware.
1Rx8 Rank and 1.1V Voltage Decide Compatibility
The 1Rx8 organization and 1.1V JEDEC voltage are the critical specifications your server's memory controller expects for full-capacity recognition at DDR5-6400. If your board's qualified vendor list calls for a different rank structure or voltage, the modules will not train at the rated speed. Always verify the exact rank and voltage requirements in your system manual before ordering.
Prednosti
- 64 GB total capacity from four 16 GB modules for full server utilisation
- DDR5 6400 speed with CL52 latency at 1.1 V for rated performance
- Registered ECC RDIMM design offloads the controller and corrects single-bit errors
- Exact 288-pin form factor verified for Supermicro H14SHM motherboard compatibility
- Built with major OEM Samsung, Micron or Hynix chips for enterprise stability
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 64GB 4X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How much power does the 1.10 V DDR5 6400 kit draw when the server runs all day?
Each module operates at 1.10 V, the standard DDR5 voltage, so total power scales with the four 16 GB sticks installed.
What motherboard slot and memory type must the system already provide for this 288-pin RDIMM kit?
The board needs four DDR5 288-pin RDIMM slots that support registered ECC memory at 6400 MT/s.
Will the 1Rx8 registered ECC modules work alongside any remaining 2Rx8 RDIMMs already populating other channels?
Mixing 1Rx8 and 2Rx8 registered DIMMs is not recommended; the memory controller expects identical rank architecture per channel for stable operation.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
