Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two green DDR5 RDIMM modules with black chips and gold contacts side by side

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 192GB (2x96GB) 4800MHz CL40 1.1V 2Rx4 288-pin Supermicro H13SSW

SKU CH-R49G-BVXEB

192 GB DDR5-4800 ECC registered DIMM kit (2 × 96 GB) validated for Supermicro H13SSW servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Zobraziť ďalších 24 konfigurácií
  • 192 GB kit matches server controller expectations for full-speed operation
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 4800 MHz DDR5 modules run at rated CL40 timing without downclocking
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13SSW population rules
  • Major-brand Samsung, Micron, or Hynix chips ensure enterprise-grade stability

Compatible DDR5 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5 4800MHz registered ECC modules built to the exact rank, voltage and timing the Supermicro H13SSW memory controller expects. The 2Rx4 organisation and 1.10V operation let the board recognise full capacity at rated speed without manual tuning. It is intended for administrators upgrading that specific server platform.

Suited for Full Population on H13SSW

The registered architecture offloads the memory controller so every slot can run fully populated at 192GB while ECC corrects single-bit errors before they reach production workloads. Builders using consumer UDIMM or SODIMM form factors, or boards that require unbuffered memory, cannot use this kit. Systems with different population rules or lower maximum capacity per slot should consult their manual first.

2Rx4 Registered DDR5 at 1.10V

The dual-rank-by-four organisation combined with registered buffering and 1.10V is the single specification that determines whether the H13SSW will initialise the modules at DDR5-4800 CL40 across all channels. If the motherboard memory population table calls for a different rank structure, voltage or buffer type, the kit will not post at its rated configuration.

Prednosti

  • 192 GB kit matches server controller expectations for full-speed operation
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 4800 MHz DDR5 modules run at rated CL40 timing without downclocking
  • 2Rx4 288-pin RDIMM form factor fits Supermicro H13SSW population rules
  • Major-brand Samsung, Micron, or Hynix chips ensure enterprise-grade stability

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 2Rx4 DDR5 RDIMMs need replacement if I populate all slots on the Supermicro H13SSW?

The 2Rx4 registered ECC design lets the memory controller handle full-capacity populations across all supported slots, so the kit stays in service as long as the platform does.

What limit appears first when the 192GB kit runs at DDR5 4800 CL40 continuously?

The registered buffer and ECC logic keep signal integrity stable at rated speed, so the practical ceiling is the motherboard's maximum supported capacity rather than the modules themselves.

How much heat and power should I expect from the 1.1V 288-pin modules under all-day load?

At 1.10V the pair draws minimal power, and with no heat spreaders installed they rely on chassis airflow to stay within normal DDR5 operating temperatures.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.