BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278589BTC
Skladom
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 256GB 16x16GB 6400 CL52 1.1V 288-pin Registered Kit for Supermicro H13DSG-OM
256 GB DDR5 registered ECC kit in sixteen 16 GB modules at 6400 MT/s CL52 1.1 V for Supermicro H13DSG-OM
- Capacity256GB (16 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB capacity in a 16-module kit fills every slot for maximum throughput
- DDR5 6400 speed with CL52 latency delivers rated performance without tuning
- 1 V registered ECC design offloads the controller and corrects single-bit errors
- 288-pin RDIMM form factor matches the Supermicro H13DSG-OM memory population rules
- Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability
Capacity and Fit
This 256GB kit contains 16 registered DDR5 RDIMM modules, each 16GB, built for the Supermicro H13DSG-OM motherboard. The 288-pin form factor matches the board's DIMM slots exactly, so the memory controller recognises the full population at rated speed.
Registered ECC Limits
Registered architecture buffers the command bus, allowing every slot to run fully populated without overloading the memory controller. ECC corrects single-bit errors on the fly, but the modules operate only at the DDR5 6400 CL52 1.1V specification; they will not negotiate higher speeds or lower latencies.
Pre-Purchase Checks
Verify that your H13DSG-OM revision supports 16 modules of 1Rx8 density and confirm the required population order in the system manual. Ensure the BIOS version listed for this capacity is installed, because unsupported firmware will prevent the kit from training at 6400 MT/s.
Prednosti
- 256 GB capacity in a 16-module kit fills every slot for maximum throughput
- DDR5 6400 speed with CL52 latency delivers rated performance without tuning
- 1 V registered ECC design offloads the controller and corrects single-bit errors
- 288-pin RDIMM form factor matches the Supermicro H13DSG-OM memory population rules
- Major OEM Samsung, Micron or Hynix chips provide enterprise-grade reliability
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 16X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
Should I choose the 16x16GB kit or a different capacity for my Supermicro H13DSG-OM?
The 256GB kit provides 16 modules of 16GB each, filling all slots on the H13DSG-OM for maximum registered ECC capacity at DDR5 6400 CL52.
What does the 6400 MT/s rating deliver once installed in the server?
The modules run at DDR5 6400 (PC5-51200) with CL52 latency and 1.10V, giving the memory controller the exact speed and timing it expects for full-rated throughput.
How does the 288-pin RDIMM interface affect performance limits on this board?
The registered 288-pin DDR5 RDIMM format buffers address and command signals, allowing all 16 slots to operate at 6400 MT/s without signal-integrity loss.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
