Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black square 80mm fan, 38mm thick, four wires visible

OEM Industries

OEM Industries DBTA0838B2G 80x38mm 12V 4.1A 4-Wire Fan

SKU CH-AT6V-5YWC8

An 80 mm square fan with 38 mm thickness runs at 12 V and 4.1 A via a four-wire connector for IBM 74Y9392 L37134 servers

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Power ConnectorSee Pic
  • LEDNo
  • 80 mm square frame fits tight server bays
  • 38 mm thick rotor moves more air per revolution
  • 12 V 4.1 A rating supports high static pressure
  • 4-wire PWM connector enables precise speed control
  • Compatible with IBM 74Y9392 and L37134 servers

12V 4-Wire Server Fan

The OEM Industries DBTA0838B2G is an 80 mm square fan built for server and workstation cooling. It draws 4.1 A at 12 V and uses a four-wire power connector for speed control. The unit is supplied new and matches the AVC 8038 form factor used in specific IBM chassis. ||

Fits IBM 74Y9392 L37134 Systems

This cooler is intended for maintainers replacing the original fan in IBM 74Y9392 or L37134 servers. It is not suitable for builds that require a different mounting pattern, voltage or connector pin-out. Buyers needing a thinner profile or LED lighting should look elsewhere. ||

80 mm x 38 mm Frame

The physical envelope is 80 mm wide and 38 mm thick, matching the AVC 8038 footprint. That exact thickness decides whether the fan seats correctly in the target server bay. Verify the chassis clearance before ordering.

Prednosti

  • 80 mm square frame fits tight server bays
  • 38 mm thick rotor moves more air per revolution
  • 12 V 4.1 A rating supports high static pressure
  • 4-wire PWM connector enables precise speed control
  • Compatible with IBM 74Y9392 and L37134 servers

Špecifikácie

ModelDBTA0838B2G
ColorBlack
TypeFan only
Fan Size80mm
Power ConnectorSee Pic
LEDNo

Otázky k tomuto produktu

What does the 4-wire PWM connector on the DBTA0838B2G control?

The four wires carry 12 V power, ground, a tachometer signal and a PWM input so the motherboard can vary fan speed precisely.

Will the 80 mm by 38 mm frame fit my IBM 74Y9392 or L37134 server?

Yes, the square 80 mm by 38 mm housing matches the original cooler dimensions for those IBM server models.

How do I install the fan and which orientation mistake should I avoid?

Align the four mounting holes, screw the fan to the heatsink or chassis, connect the 4-wire plug to the board header, and ensure the airflow arrow points toward the heatsink fins.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.