Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 40mm square fan with 3-pin connector, no LED

OEM Industries

OEM Industries FD1240-A3033A 40mm 3-pin CPU cooler

SKU CH-373M-8GWHZ

Compact 40 mm ball-bearing fan with 3-pin 12 V 0.07 A power for CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size40mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • LEDNo
  • Compact 40 mm frame fits tight builds
  • 12 V 0.07 A draw keeps power use low
  • Ball bearing gives long running life
  • Three-pin connector enables speed monitoring
  • Plain black design suits any system colour

Compact 40 mm CPU cooler

The OEM Industries FD1240-A3033A is a square 40 mm fan unit designed for tight chassis where a full tower cooler cannot fit. It targets builders upgrading small-form-factor systems or replacing a noisy stock blower on legacy hardware. The three-pin connector allows direct attachment to most motherboard headers without adapters.

Thermals noise and power

Ball-bearing construction keeps rotational friction low while the 12 V 0.07 A rating limits power draw to under one watt. At typical speeds the fan moves enough air for low-TDP processors yet stays quiet enough for office or home-theatre use. No LED lighting means no extra glare in darkened rooms.

Single specification that decides fit

The cooler is fan-only with no heatsink base or mounting hardware included. Buyers who need an integrated heatpipe tower or a threaded retention kit for a specific socket must look elsewhere. Verify that your board provides a three-pin header and that the 40 mm footprint clears surrounding components before ordering.

Prednosti

  • Compact 40 mm frame fits tight builds
  • 12 V 0.07 A draw keeps power use low
  • Ball bearing gives long running life
  • Three-pin connector enables speed monitoring
  • Plain black design suits any system colour

Špecifikácie

ModelFD1240-A3033A
ColorBlack
TypeFan only
Fan Size40mm
Bearing TypeBall
Power Connector3 Pin
LEDNo

Otázky k tomuto produktu

How do I install the 40mm FD1240-A3033A cooler and what is the step people often miss?

Mount the 40mm fan using the four corner holes, connect the 3-pin header to the motherboard CPU_FAN port, and verify in BIOS that the fan spins at 12V 0.07A; the missed step is forgetting to set the header to PWM or DC mode so the 3-pin fan runs at full speed.

What maintenance or replacement will the FD1240-A3033A need over time?

The ball-bearing fan should be cleaned of dust every few months with compressed air; if noise or vibration appears, replace the entire 40mm unit since the bearing is not serviceable.

What limit appears first on the FD1240-A3033A during sustained use?

The 40mm frame and 0.07A current draw limit airflow, so thermal throttling of the CPU occurs before the fan reaches any mechanical limit.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.