Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black square 60mm fan with 25mm thickness and three-pin connector

OEM Industries

OEM Industries MMF-06D24DS ACA 60mm 24V 0.1A 3-pin CPU cooler

SKU CH-9Q3J-H8WQ0

A 60 mm ball-bearing fan running on 24 V at 0.1 A with a 3-pin connector for server or inverter cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector3 Pin
  • 60 mm fan fits compact server and inverter chassis
  • Ball bearing extends operating life in continuous use
  • 24 V 0.1 A draw keeps power load low
  • Three-pin connector enables speed monitoring
  • 6025 form factor suits standard 60 x 25 mm mounts

OEM Industries 60mm 24V CPU Cooler

This new OEM Industries cooler is a 60mm square frame fan built for industrial equipment. It runs on 24V at .1A through a three-pin power connector and uses a ball bearing. The unit is a fan-only module without a heatsink, designed for inverter, ABB or Fanuc server environments.

Suits 24V industrial chassis.

Technicians maintaining 24V inverter cabinets or legacy server gear will find the voltage and pinout match their wiring. Builders assembling desktop PCs cannot use this cooler because the 24V supply and three-pin connector differ from typical motherboard fan headers. Buyers needing a heatsink assembly or PWM control should select a different product.

24V .1A three-pin power specification

The defining specification is the 24V .1A draw on a three-pin connector. This voltage and current rating decides whether the cooler matches the target power rail. No other figure in the data changes that compatibility decision.

Prednosti

  • 60 mm fan fits compact server and inverter chassis
  • Ball bearing extends operating life in continuous use
  • 24 V 0.1 A draw keeps power load low
  • Three-pin connector enables speed monitoring
  • 6025 form factor suits standard 60 x 25 mm mounts

Špecifikácie

ModelMMF-06D24DS ACA
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector3 Pin

Otázky k tomuto produktu

Will the 60 mm square frame with 25 mm thickness fit my 6025 mounting holes?

The fan measures 60 mm by 60 mm and is 25 mm thick, matching the standard 6025 footprint used in many inverter and server chassis.

How do I connect the three-pin lead to a 24 V supply without reversing polarity?

Align the keyed three-pin connector so the yellow wire receives 24 V, the black wire goes to ground, and the third wire carries the tach signal; the housing only fits one way.

When should I plan to replace the ball-bearing fan in continuous inverter duty?

Ball bearings typically last several years at 24 V 0.1 A in steady airflow; monitor for rising noise or speed drop and swap the unit when either appears.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.