Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Small black and yellow frameless VGA fan with two wires and a two-pin connector

OEM Industries

OEM Industries PL50S12M-3 12V 0.24A frameless VGA fan CPU cooler

SKU CH-12KV-QJ6GJ

A 12 V frameless VGA fan with sleeve bearing and two-pin connector for graphics card cooling

  • ColorBlack&Yellow
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Frameless design fits tight graphics-card spaces
  • 12 V 0.24 A draws minimal power from the board
  • Two-pin connector enables simple plug-in installation
  • Sleeve bearing keeps acoustic output low
  • Black-and-yellow finish matches common build themes

Compact frameless cooler for graphics cards

The OEM Industries PL50S12M-3 is a frameless VGA fan designed to mount directly onto a graphics card heatsink. It suits builders replacing a failed original cooler or assembling a custom thermal solution for a GPU. Buyers needing a complete heatsink-and-fan assembly or a PWM-controlled unit should look elsewhere.

12 V 0.24 A two-pin power draw

The cooler runs on a 12 V supply drawing 0.24 A through a two-pin connector. This single electrical rating determines whether the fan matches the header or adapter you plan to use.

Sleeve bearing acoustics and low power

A sleeve bearing keeps running noise modest while the 0.24 A draw adds minimal load to the 12 V rail. Thermals depend entirely on the heatsink it is paired with and the airflow path inside the case.

Prednosti

  • Frameless design fits tight graphics-card spaces
  • 12 V 0.24 A draws minimal power from the board
  • Two-pin connector enables simple plug-in installation
  • Sleeve bearing keeps acoustic output low
  • Black-and-yellow finish matches common build themes

Špecifikácie

ModelPL50S12M-3
ColorBlack&Yellow
TypeFan only
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Otázky k tomuto produktu

What does the 12 V rating mean when the fan is installed in a PC?

It draws .24 A from a 12 V rail, so the system needs to supply that current on the fan header.

What does the 2 pin connector limit in practice?

The fan runs at full speed continuously because the header cannot send a PWM signal.

What does the frameless design require for mounting?

It must be screwed or clipped into a shroud or bracket that matches the 50 mm frame.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.