Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 80mm square CPU fan with 4-pin connector

OEM Industries

OEM Industries PMD1208PKV1-A 80mm 4-Pin CPU Cooler

SKU CH-FF7N-PND4H

An 80 mm square fan with maglev bearing and 4-pin PWM control draws 4.8 W at 12 V

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeMaglev
  • Power Connector4 Pin
  • LEDNo
  • Maglev bearing reduces friction for longer life
  • 80 mm square frame fits tight CPU clearance
  • 4-pin PWM connector enables precise speed control
  • 12 V 4.8 W draw keeps power load low
  • Fan-only design lets you choose your own heatsink

Compact 80 mm square cooler

The OEM Industries PMD1208PKV1-A is a low-profile square cooler built around a SUNON 8020 fan. It suits small-form-factor builds, embedded boards or replacement scenarios where a slim 20 mm thick unit fits and a 4-pin header is available.

Four-pin PWM control limit

The 4-pin connector enables PWM speed regulation from a 12 V header drawing 4.8 W maximum. Control granularity and minimum speed depend on the motherboard's fan-curve implementation; the cooler itself has no onboard lighting or additional sensors.

Clearance and header check

Verify that the mounting holes match an 80 mm square pattern and that 20 mm of vertical clearance exists above the CPU socket. Ensure the board provides a standard 4-pin PWM header at 12 V; proprietary or 3-pin-only headers will not deliver full speed control.

Prednosti

  • Maglev bearing reduces friction for longer life
  • 80 mm square frame fits tight CPU clearance
  • 4-pin PWM connector enables precise speed control
  • 12 V 4.8 W draw keeps power load low
  • Fan-only design lets you choose your own heatsink

Špecifikácie

ModelPMD1208PKV1-A
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeMaglev
Power Connector4 Pin
LEDNo

Otázky k tomuto produktu

Which version of this 80 mm cooler should I choose for a 12 V system?

The PMD1208PKV1-A model is rated at 12 V and 4.8 W, so it matches a standard 12 V motherboard header without any extra selection.

What does the 4.8 W rating mean when the fan is running inside my case?

At full speed the fan draws 4.8 W from the 12 V header, which is the maximum power it will consume during operation.

How does the 4-pin connector affect speed control?

The 4-pin PWM connector allows the motherboard to vary the fan speed precisely instead of running at a fixed voltage.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.