Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 97mm blower fan with 33mm thickness and three-wire connector

OEM Industries

OEM Industries SFBD12H7P-102 97mm 12V 0.65A 7.8W 3-wire blower CPU cooler

SKU CH-Z2NN-RZBX2

A 97 mm blower fan with ball bearing runs at 12 V, 0.65 A and 7.8 W using a three-wire connection

  • ColorBlack
  • TypeFan only
  • Fan Size97mm
  • Bearing TypeBall
  • LEDNo
  • 97 mm blower directs airflow over tight server heatsinks
  • 12 V 0.65 A motor draws only 7.8 W
  • Ball bearing ensures long life in continuous operation
  • Three-wire connection enables speed monitoring by the motherboard
  • Compact 97 x 33 mm frame fits 1U and dense chassis

Compact Server Blower for 97mm Mounts

This 97mm blower from OEM Industries delivers 12V, 0.65A operation rated at 7.8W for targeted airflow in tight server chassis. The 3-wire connection provides speed monitoring for system management. Ball-bearing construction supports continuous duty in rack environments where axial fans cannot reach restricted heatsink channels.

Replaces Failing 9733-Format Blowers

The SFBD12H7P-102 matches the 97x33mm footprint common in 1U and 2U server boards, making it a direct swap for worn OEM units. The jump is worth it when original blowers develop bearing noise or rpm drift that triggers thermal throttling under sustained loads. No LED lighting keeps distraction low in dense rack rows.

Verify 3-Wire Header and 97mm Clearance

Confirm your motherboard or fan controller supplies a 12V 3-pin header; 4-pin PWM control is not supported by this model. Measure the mounting pattern and vertical clearance against the 33mm thickness to ensure the blower housing clears adjacent components. Ball bearings tolerate orientation changes but require unobstructed intake and exhaust paths.

Prednosti

  • 97 mm blower directs airflow over tight server heatsinks
  • 12 V 0.65 A motor draws only 7.8 W
  • Ball bearing ensures long life in continuous operation
  • Three-wire connection enables speed monitoring by the motherboard
  • Compact 97 x 33 mm frame fits 1U and dense chassis

Špecifikácie

ModelSFBD12H7P-102
ColorBlack
TypeFan only
Fan Size97mm
Bearing TypeBall
LEDNo

Otázky k tomuto produktu

What width and depth does the 97mm blower need for the mounting holes?

The blower measures 97mm by 33mm, so the mounting pattern follows those dimensions.

How do I connect the 3-wire lead to a 12V server header without reversing polarity?

Match the three wires to the 12V, ground and tachometer pins on the server fan header; the keyed connector prevents reverse insertion.

When should I plan to replace the ball-bearing fan in a 10-server rack?

Ball bearings typically last several years of continuous 12V 0.65A operation; monitor rpm via the third wire and swap the unit when speed drops or noise rises.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.