Tripp Lite
Tripp Lite PDUMNH15 Monitored 1U PDU 120V 15A 8x 5-15R
- Monitored
- 1U
328,99 USD
0.00422015BTC
Skladom
OEM Industries
OEM Industries SP101AT 1122 HBT 120mm Fan 115V .15A 2-Wire
A 120mm ball-bearing fan running on 115V AC at 50/60Hz with a two-wire connector
- ColorBlack
- TypeFan only
- Fan Size120mm
- Bearing TypeBall
- Power Connector2 Wires
- LEDNo
- 120mm ball-bearing fan runs quietly
- 115 V AC input works on standard mains power
- 15 A draw keeps energy use low
- Two-wire connection simplifies installation
- Black 12 cm frame fits typical case mounts
120 mm AC fan for case cooling
This 120 mm fan runs directly on 115 V AC mains power at 50 or 60 Hz and draws 0.15 A. It is intended for builders who need a simple exhaust or intake fan without a DC power supply or motherboard header. The two-wire lead connects to a standard AC circuit, so it suits enclosure ventilation, industrial boxes or legacy chassis that provide mains voltage.
Ball-bearing motor and two-wire lead
The ball bearing reduces friction compared with sleeve designs, giving a longer service life in continuous operation. Because the fan has no PWM or tachometer wire, speed cannot be monitored or controlled by software; it runs at full speed whenever power is applied. The absence of LEDs keeps the unit dark, which is useful in light-sensitive environments.
Black frame with 12025 mounting pattern
The square 12025 frame fits standard 120 mm fan mounts using four corner screws. The 2-wire cable exits the frame for direct wiring to an AC source, so installers must provide their own strain relief and insulation. No brackets, filters or screws are included, and the fan cannot be plugged into a typical 12 V DC header on a PC motherboard.
Prednosti
- 120mm ball-bearing fan runs quietly
- 115 V AC input works on standard mains power
- 15 A draw keeps energy use low
- Two-wire connection simplifies installation
- Black 12 cm frame fits typical case mounts
Špecifikácie
| Model | SP101AT 1122 HBT |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 120mm |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| LED | No |
Otázky k tomuto produktu
How often should I plan to replace the ball bearing in this SP101AT 1122 HBT fan?
The ball bearing is sealed and not user-serviceable; the fan is replaced as a unit when airflow or noise degrades.
What limits continuous operation of the 120mm SP101AT 1122 HBT at 115V?
The motor draws 0.15A at 50/60Hz; sustained use is limited by the bearing life and AC supply stability.
How much heat and noise does the SP101AT 1122 HBT produce when running all day on 115V AC?
Rated at 0.15A on 115V 50/60Hz, it runs within the Silence Cooler design envelope for low noise and minimal heat.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
