OEM Industries
OEM Industries T35119-DEL 92mm 38mm 12V 1.8A 3-pin CPU cooler
A 92 mm square fan with 38 mm depth, ball bearing and 3-pin 12 V 1.8 A power for server or case cooling
- ColorBlack
- TypeFan only
- Fan Size92mm*38mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 92 mm square frame fits standard 9238 mounts
- 38 mm thick body moves more air through dense heatsinks
- Ball bearing design resists wear in continuous server duty
- 12 V 1.8 A rating delivers strong static pressure
- 3-pin connector provides simple speed monitoring
92 mm × 38 mm ball-bearing fan
This OEM Industries T35119-DEL cooler is a 92 mm square fan with a 38 mm frame depth. It runs on 12 V at 1.8 A through a three-pin connector and uses a ball bearing for rotation. The unit is supplied new in black and contains no LED lighting.
Suits 3-pin 12 V mounts needing 38 mm depth
The fan fits server or workstation chassis that accept a 92 mm × 38 mm footprint and provide a standard three-pin 12 V header. It is not intended for four-pin PWM headers, thinner fan bays, or voltage-regulated headers that differ from the 12 V 1.8 A specification.
38 mm frame depth decides fit
The single specification that determines compatibility is the 38 mm frame depth. Verify that your chassis or heatsink mounting points accommodate this exact thickness before purchase.
Prednosti
- 92 mm square frame fits standard 9238 mounts
- 38 mm thick body moves more air through dense heatsinks
- Ball bearing design resists wear in continuous server duty
- 12 V 1.8 A rating delivers strong static pressure
- 3-pin connector provides simple speed monitoring
Špecifikácie
| Model | T35119-DEL |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 92mm*38mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Otázky k tomuto produktu
Will this 92mm by 38mm fan fit my chassis mounting holes?
The frame measures 92mm square by 38mm thick, matching standard 92mm fan mounts with four corner screw holes.
How do I connect the 3-pin power connector without losing speed control?
Plug the 3-pin header into a motherboard chassis-fan or CPU-fan socket; the board regulates voltage for speed control.
When should I plan to replace the ball-bearing fan?
Ball bearings typically run for years; replace the unit when noise rises or airflow drops noticeably.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001045BTC
Skladom