Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 16GB DDR4 3200 CL22 1.2V 288pin UDIMM 3U2D42R816GB

SKU CH-8D9S-JP46W

16GB DDR4 3200 CL22 UDIMM for HP ProDesk 400/405 SFF and Tower systems

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.2V
  • ECCNo
  • 16GB DDR4 3200MHz boosts multitasking speed
  • CL22 latency and 1.2V voltage lower power draw
  • 288-pin unbuffered design fits listed HP ProDesk models
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

16GB DDR4 3200 UDIMM for HP ProDesk

This 16GB DDR4 3200MHz CL22 module is built for HP ProDesk 400 G7 SFF, 400 G7 Tower, 400 G9 SFF, 405 G6 SFF and 405 G8 SFF systems. It runs at 1.2V on a standard 288-pin unbuffered non-ECC layout. JEDEC compliance makes it a warranty-safe upgrade for those desktops.

Suits owners of the listed ProDesk models.

Buyers who need ECC error correction or registered buffering should look elsewhere. Systems that require a different pin count, voltage or form factor cannot use this module. The part is validated only for the five HP ProDesk families named in the specifications.

Speed and latency decide fit

The module operates at DDR4 3200 (PC4-25600) with CL22 timing and 2Rx8 organisation. It will down-clock to 2133, 2400, 2666 or 2933MHz if the platform demands it. Confirm that your ProDesk accepts 3200MHz CL22 before purchase.

Prednosti

  • 16GB DDR4 3200MHz boosts multitasking speed
  • CL22 latency and 1.2V voltage lower power draw
  • 288-pin unbuffered design fits listed HP ProDesk models
  • JEDEC and RoHS compliant for warranty-safe upgrade
  • Backward compatible with 2133, 2400, 2666 and 2933MHz systems

Špecifikácie

BrandOWC
Part Number3U2D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ProDesk 400 G7 SFF
HP ProDesk 400 G7 Tower
HP ProDesk 400 G9 SFF
HP ProDesk 405 G6 SFF
HP ProDesk 405 G8 SFF

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 288-pin UDIMM fit the HP ProDesk 400 G7 SFF memory slots?

Yes, the 288-pin DDR4 UDIMM is the correct form factor for the HP ProDesk 400 G7 SFF and the other listed models.

What is the correct way to seat the module, and what step do people often miss?

Align the notch with the slot key, press down firmly until both side clips click shut; the step often missed is verifying both clips have fully locked.

When will this 16GB DDR4 3200 CL22 module need replacement?

DDR4 memory has no moving parts and typically lasts the life of the system; replace only if a fault appears or capacity needs increase.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.