BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
8GB DDR3 1333 ECC registered RDIMM matching Dell A4188276 A6199968 A6996808 SNPP9RN2C/8G SNPX3R5MC/8G
This 8 GB DDR3 module runs at 1333 MT/s with CL9 latency and 1.5 V operation. It uses a 240-pin registered DIMM form factor with 2Rx4 organisation and ECC error correction. The part is designed for workstation and server platforms that require registered memory. It replaces Dell part numbers A4188276, A6199968 and A6996808.
Registered DDR3 memory cannot be mixed with unbuffered modules in the same system. The 1333 MT/s JEDEC standard defines the maximum data rate for this module. Capacity scales with the number of slots and the memory controller's rank limit. Exceeding the controller's supported rank count per channel will prevent the system from posting.
Verify that your motherboard or server explicitly supports DDR3 ECC registered RDIMMs. Confirm the maximum memory capacity per slot and the total rank limit per channel. Ensure all installed modules share the same capacity, speed and rank configuration for stability. This module will not work in standard desktop computers that require unbuffered memory.
| Brand | OWC |
|---|---|
| Part Number | 1R3D32R408GB |
| Capacity | 8GB |
| Type | 240-Pin DDR3 ECC RDIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
This part is an 8 GB DDR3 1333 (PC3-10600) CL9 registered ECC RDIMM. Select the same capacity, speed, and registered type for every slot to keep the memory subsystem balanced.
The module operates at 1333 MT/s with CL9 timing at 1.5 V, providing JEDEC-standard throughput for registered ECC platforms that support DDR3 1333.
The 240-pin DDR3 registered ECC form factor fits only workstation and server boards that accept registered DIMMs; it will not work in standard desktop or unbuffered-memory systems.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?