Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular DDR4 memory module with gold edge contacts and black chips, no heat spreader

OWC

OWC 2U1D42R816GB 16GB DDR4 2133 CL15 1.2V 288pin UDIMM memory upgrade

SKU CH-HCVY-DBMAP

16 GB DDR4 2133 MHz CL15 1.2 V UDIMM upgrade for HP ENVY Phoenix 860 series desktops

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts HP Envy Phoenix performance with 16 GB DDR4 upgrade
  • Runs at 2133 MHz CL15 for responsive multitasking
  • Low 1.2 V DDR4 voltage reduces system power draw
  • JEDEC compliant module ensures warranty-safe installation
  • 288-pin UDIMM fits listed HP Envy Phoenix 860 models

HP Envy Phoenix memory upgrade

This 16 GB DDR4 UDIMM is built for HP Envy Phoenix desktops including the 860-091na 860-100nl 860-100nt 860-102ng and 860-102nl. It targets owners who want a straightforward capacity increase without changing voltage or form factor.

288-pin DDR4 2133 CL15 module

The stick plugs into a standard 288-pin DDR4 slot and runs at 1.2 V with CL15 timing. It is non-ECC and unbuffered so it works in the consumer desktop platforms listed. No heat spreader is fitted leaving maximum clearance for large CPU coolers or tight chassis layouts.

Replaces slower or smaller DDR4 DIMMs

Swapping an 8 GB or lower-speed module for this 16 GB PC4-17000 part adds headroom for multitasking and larger workloads. The upgrade is worthwhile when the system currently runs below 2133 MHz or has free slots that can accept a 2Rx8 rank configuration. Not for systems that require ECC registered memory or a different DDR generation.

Prednosti

  • Boosts HP Envy Phoenix performance with 16 GB DDR4 upgrade
  • Runs at 2133 MHz CL15 for responsive multitasking
  • Low 1.2 V DDR4 voltage reduces system power draw
  • JEDEC compliant module ensures warranty-safe installation
  • 288-pin UDIMM fits listed HP Envy Phoenix 860 models

Špecifikácie

BrandOWC
Part Number2U1D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP ENVY Phoenix 860-091na
HP ENVY Phoenix 860-100nl
HP ENVY Phoenix 860-100nt
HP ENVY Phoenix 860-102ng
HP ENVY Phoenix 860-102nl

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How much voltage does the 16GB DDR4 2133 CL15 module draw under sustained load?

The module operates at the standard DDR4 voltage of 1.2V. As an unbuffered, non-ECC UDIMM without a heat spreader, it relies on case airflow to manage heat during continuous operation.

Will the OWC 288-pin UDIMM run silently in an HP Envy Phoenix 860 chassis all day?

Memory modules have no moving parts, so they produce no audible noise. The 1.2V DDR4 design keeps thermal output low, but sustained loads depend on your chassis airflow to dissipate heat.

Does my HP Envy Phoenix 860-091na need a specific BIOS version or CPU to accept this 2Rx8 DDR4 stick?

This 288-pin DDR4 2133 CL15 UDIMM is validated for the HP Envy Phoenix 860-091na, 860-100nl, 860-100nt, 860-102ng and 860-102nl. It requires a DDR4-compatible platform.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.