NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
32 GB DDR4 ECC registered DIMM running at 2666 MHz with CL19 latency and 1.2 V operation for servers and workstations
This 32GB DDR4 2666MHz ECC Registered RDIMM is built for servers, workstations and NAS systems that require registered memory with error correction. It operates at 1.2V with a CL19 latency and a 2Rx4 rank configuration. The module is not compatible with standard desktop computers and cannot be mixed with unbuffered memory.
The 288-pin RDIMM fits DDR4 slots that support registered ECC memory and is backward compatible with 2133MHz and 2400MHz bus speeds. It requires a platform that accepts registered DIMMs and will not work in consumer boards limited to unbuffered modules. Using this module frees the system from single-bit errors and allows higher capacity configurations per channel.
Under continuous load the module maintains its rated 2666MHz speed and 1.2V voltage without a heat spreader, relying on chassis airflow for cooling. ECC and registered buffering provide data integrity during extended compute or storage workloads. The JEDEC-compliant design ensures stable timing over long periods rather than short benchmark bursts.
| Brand | OWC |
|---|---|
| Part Number | 2R6D42R432GB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 ECC RDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Heat Spreader | No |
The module runs at CL19 latency, which is the standard timing for JEDEC DDR4 2666 registered DIMMs.
No heat spreader is fitted; the registered design and 1.2V voltage keep thermals within spec for continuous server workloads.
A 288-pin DDR4 registered DIMM slot that supports ECC registered memory is required; unbuffered or non-ECC platforms will not accept this module.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?