Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with black memory chips, gold edge connector, no heat spreader

OWC

OWC 4GB DDR4 2400 CL17 1.2V 288pin UDIMM HP EliteDesk 800 G3

SKU CH-SHZH-8E73D

Adds 4 GB of DDR4-2400 CL17 memory to HP EliteDesk 800 G3 SFF or Tower systems

  • Capacity4GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.2V
  • ECCNo
  • Boosts HP EliteDesk 800 G3 performance with 4GB DDR4 2400MHz module
  • JEDEC compliant PC4-19200 CL17 1.2V ensures stable operation
  • Unbuffered 288-pin UDIMM fits SFF and Tower chassis
  • Backward compatible with 2133MHz systems for flexible upgrades
  • 1Rx8 single-rank non-ECC design simplifies DIY installation

OWC 4GB DDR4 2400 UDIMM for HP EliteDesk 800 G3

This OWC memory module adds 4GB of DDR4 capacity to HP EliteDesk 800 G3 SFF and Tower systems. It operates at 2400MHz with CL17 latency and 1.2V power draw. The 288-pin unbuffered non-ECC design fits standard desktop DIMM slots for a straightforward DIY upgrade.

Suits owners of compatible HP desktops needing

Buyers who need higher total capacity or multiple modules for dual-channel operation should consider other options. Systems requiring ECC error correction or registered memory are not supported by this non-ECC unbuffered stick.

Runs at DDR4 2400 (PC4-19200) with CL17 timing

The module follows JEDEC specifications and offers backward compatibility with 2133MHz buses. Verify your EliteDesk 800 G3 accepts 1Rx8 single-rank UDIMMs before purchasing.

Prednosti

  • Boosts HP EliteDesk 800 G3 performance with 4GB DDR4 2400MHz module
  • JEDEC compliant PC4-19200 CL17 1.2V ensures stable operation
  • Unbuffered 288-pin UDIMM fits SFF and Tower chassis
  • Backward compatible with 2133MHz systems for flexible upgrades
  • 1Rx8 single-rank non-ECC design simplifies DIY installation

Špecifikácie

BrandOWC
Part Number2U4D41R804GB
Capacity4GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 800 G3 SFF
HP EliteDesk 800 G3 Tower

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 288-pin DDR4 UDIMM need any replacement or maintenance after installation?

No, the module has no moving parts and no heat spreader, so it requires no scheduled maintenance or replacement under normal use.

What limit appears first when the 4 GB CL17 module runs at 2400 MHz continuously?

The 4 GB capacity is the first constraint; sustained workloads will exhaust available memory before the DDR4 2400 speed or CL17 latency become bottlenecks.

How much heat and power does the 1.2 V DDR4 stick produce during all-day operation?

At 1.2 V the module draws minimal power and runs cool without a heat spreader, so fan noise and case temperatures stay essentially unchanged.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.