Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 288-pin DDR5 RDIMM module with black chips, no heat spreader

OWC

OWC 5R6D54R4128G 128GB DDR5 5600 ECC RDIMM 4Rx4 1.1V SuperBlade memory upgrade

SKU CH-VE28-B3NPY

A 128GB DDR5 5600 ECC registered RDIMM for Supermicro SuperBlade SBI-611E and SBI-621E servers

  • Capacity128GB
  • Type288-Pin DDR5 ECC RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency46
  • Voltage1.1V
  • ECCYes

Capacity 128GB

  • 128 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • ECC registered design protects data integrity in critical workloads
  • 1 V operation reduces power draw per module
  • Validated for Supermicro SuperBlade SBI-611E and SBI-621E series

Purpose-built server upgrade

This OWC DDR5 5600 ECC registered DIMM provides a single 128GB module for Supermicro SuperBlade systems. It targets administrators expanding memory in SBI-611E-1T2N, SBI-611E-5T2N, SBI-621E-1C3N, SBI-621E-1NE34 or SBI-621E-1NE38 blade servers. The 4Rx4 organisation and 1.1V operation match the platform's registered memory requirement.

Verify blade memory rules

Confirm the SuperBlade chassis accepts 288-pin DDR5 RDIMMs at PC5-44800 speed with CL46 latency. Registered ECC modules cannot be mixed with unbuffered or load-reduced DIMMs in the same system. Check the blade's qualified-vendor list and maximum supported capacity per slot before ordering.

Thermals and power profile

The module runs at the standard 1.1V DDR5 voltage without a heat spreader, relying on the blade's directed airflow for cooling. Registered operation adds minimal latency overhead while the ECC circuitry corrects single-bit errors transparently. Power draw scales with the 5600 MT/s data rate and 4-rank density during sustained workloads.

Prednosti

  • 128 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • ECC registered design protects data integrity in critical workloads
  • 1 V operation reduces power draw per module
  • Validated for Supermicro SuperBlade SBI-611E and SBI-621E series

Špecifikácie

BrandOWC
Part Number5R6D54R4128G
Capacity128GB
Type288-Pin DDR5 ECC RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency46
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade SBI-611E-1T2N
Supermicro SuperBlade SBI-611E-5T2N
Supermicro SuperBlade SBI-621E-1C3N
Supermicro SuperBlade SBI-621E-1NE34
Supermicro SuperBlade SBI-621E-1NE38

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What comes in the box with the OWC 5R6D54R4128G 128GB DDR5 5600 ECC RDIMM?

The box contains one 128GB DDR5 5600 PC5-44800 CL46 4Rx4 288-pin 1.1V ECC Registered RDIMM module. No cables, brackets or additional hardware are included.

Which capacity or version should I choose for a SuperBlade SBI-611E-1T2N or SBI-621E-1NE38?

This part number is a single 128GB module. Select it when your server requires a 128GB DDR5 5600 ECC Registered DIMM; other capacities are separate part numbers.

What does the 5600 CL46 rating mean once the module is installed in a SuperBlade server?

The module runs at DDR5 5600 MT/s with a CAS latency of 46 cycles at 1.1V, delivering JEDEC-standard bandwidth and error-correction for the SuperBlade platform.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.