Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular circuit board with gold edge connector and black memory chips

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC RDIMM upgrade

SKU CH-KZ51-1S2FK

An 8 GB DDR3 1333 MHz ECC registered DIMM for Dell PowerEdge C2100, C6105, M910, R810 and R910 servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design prevents data errors in critical workloads
  • 1333 MHz DDR3 speed matches Dell PowerEdge specifications
  • Single 8 GB module simplifies capacity expansion
  • 5 V operation meets JEDEC standard for DDR3
  • Validated for PowerEdge C2100, C6105, M910, R810, R910

Server-grade ECC RDIMM for Dell PowerEdge

This 8GB DDR3 registered DIMM delivers error-correcting memory for Dell PowerEdge C2100, C6105, M910, R810 and R910 servers. It operates at 1333MHz with CL9 latency and 1.5V voltage. The module uses a 2Rx4 organisation and 240-pin form factor. It is not compatible with standard desktop computers or unbuffered memory configurations.

Sustained reliability under continuous workloads

ECC registration corrects single-bit errors and detects multi-bit errors during extended operation, reducing the risk of data corruption in always-on environments. Registered signalling lowers electrical load on the memory controller, allowing stable performance across fully populated slots. JEDEC-compliant construction and laboratory testing support consistent throughput in multi-user server and NAS deployments.

Registered ECC requirement decides fit

This module only works in systems that require registered ECC DDR3 memory; it will not function in platforms that accept only unbuffered non-ECC DIMMs. Buyers needing standard desktop memory or non-ECC server modules cannot use this part. Verify that the target Dell PowerEdge model specifies registered ECC support before purchase.

Prednosti

  • ECC registered design prevents data errors in critical workloads
  • 1333 MHz DDR3 speed matches Dell PowerEdge specifications
  • Single 8 GB module simplifies capacity expansion
  • 5 V operation meets JEDEC standard for DDR3
  • Validated for PowerEdge C2100, C6105, M910, R810, R910

Špecifikácie

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerEdge C2100
Dell PowerEdge C6105
Dell PowerEdge M910
Dell PowerEdge R810
Dell PowerEdge R910

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How much power does the 1.5V DDR3 1333 module draw when the server runs continuously?

The module operates at 1.5V, the standard voltage for DDR3 1333 registered DIMMs, so power draw matches the JEDEC specification for that speed and voltage.

What must the Dell PowerEdge already have to accept this 240-pin ECC RDIMM?

The system must be a Dell PowerEdge C2100, C6105, M910, R810 or R910 with free 240-pin DDR3 slots that support registered ECC memory.

Can this 2Rx4 CL9 stick run alongside older 1Rx4 DDR3 modules in the same R810?

Mixing ranks is possible if the platform's memory controller supports it, but registered ECC cannot be mixed with unbuffered memory and all modules must run at the same 1333 MT/s speed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.