Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green 240-pin DDR3 RDIMM circuit board with black memory chips

OWC

OWC 8GB DDR3 1333 PC3-10600 CL9 2Rx4 240-pin 1.5V ECC Registered RDIMM for Dell PowerVault NX300 NX3000

SKU CH-NKNJ-87NYP

8GB DDR3 ECC registered RDIMM running at 1333MHz for Dell PowerVault NX300 and NX3000 servers

  • Capacity8GB
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 8GB

  • ECC registered design protects data integrity in Dell PowerVault servers
  • 8GB capacity expands memory for NX300 and NX3000 systems
  • DDR3 1333 PC3-10600 speed matches original server specifications
  • CL9 latency with 1.5V operation ensures stable registered performance
  • 240-pin 2Rx4 RDIMM form factor fits compatible Dell PowerVault slots

Server-grade DDR3 ECC RDIMM

This 8GB registered DIMM is built for Dell PowerVault NX300 and NX3000 storage servers. It delivers error-correcting, registered DDR3 memory for workloads that demand data integrity and uptime.

Installation notes

The module uses a standard 240-pin DDR3 form factor and seats like any RDIMM. It will not work in desktop motherboards that require unbuffered memory and cannot be mixed with non-registered modules in the same system.

8GB PC3-10600 CL9 specification

The single module runs at 1333 MT/s with CL9 latency at 1.5V in a 2Rx4 organisation. Buyers needing higher density per slot or a different voltage must choose another part.

Prednosti

  • ECC registered design protects data integrity in Dell PowerVault servers
  • 8GB capacity expands memory for NX300 and NX3000 systems
  • DDR3 1333 PC3-10600 speed matches original server specifications
  • CL9 latency with 1.5V operation ensures stable registered performance
  • 240-pin 2Rx4 RDIMM form factor fits compatible Dell PowerVault slots

Špecifikácie

BrandOWC
Part Number1R3D32R408GB
Capacity8GB
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemDell PowerVault NX300
Dell PowerVault NX3000

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How can I verify the 1333 MHz DDR3 module is running correctly after installing it in a PowerVault NX300?

Enter the system BIOS or iDRAC interface during boot and confirm the memory speed reads 1333 MHz, the capacity shows 8 GB per module, and ECC Registered status is active.

What is included in the box and what else is required to add this memory to a PowerVault NX3000?

The box contains one 8 GB 240-pin DDR3 ECC Registered RDIMM; no cables, tools or additional hardware are needed — just an available DIMM slot on the system board.

Which OWC DDR3 ECC Registered version should I choose for a Dell PowerVault NX300 or NX3000?

Select the 8 GB PC3-10600 CL9 2Rx4 1.5 V module (part 1R3D32R408GB) — it matches the qualified speed, rank and voltage for both NX300 and NX3000 servers.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.