NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Replace Power
Grey 420W ATX power supply with 20+4 pin, SATA and peripheral connectors, 80mm fan, switchable 110V/220V input, replaces HP 5187-6116, 5188-0129, 5188-7601, AG263PA
The Replace Power RPSU-C99-1 is a 420 watt ATX power module designed as a direct replacement for specific HP desktop units including part numbers 5187-6116 5188-0129 5188-7601 and AG263PA. It suits technicians and owners who need to restore power to those compatible systems without modifying the case or wiring. A built-in 80mm fan provides active cooling.
The unit delivers 420 watts of continuous power through a switchable 110V or 220V input. It supplies the standard ATX 20+4 pin motherboard connector a dedicated 12V ATX connector two large peripheral connectors two additional large connectors one small connector and a single SATA connector for drives. Builds requiring multiple SATA devices or additional PCIe power cables will exceed the provided connector count.
The grey ATX form factor fits the original mounting points of the listed HP models. Included cable lengths are one 15-inch SATA lead one 14-inch motherboard lead one 14-inch 12V lead two 15-inch large peripheral leads two 6-inch large peripheral leads and one 6-inch small peripheral lead. The fixed cable set frees the builder from sourcing adapters but offers no modular routing for custom cable management.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-1 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
Yes, the 20+4 pin ATX connector supports both 20-pin and 24-pin motherboard configurations, so it fits older 20-pin boards directly.
The 80 mm fan should spin and the system should power on without shutdowns; the 110V/220V switch must match your mains voltage.
Included: one 15-inch SATA, one 14-inch 20+4 pin ATX, one 14-inch 12V ATX, two 15-inch Molex, two 6-inch Molex, one 6-inch floppy. No extra cables are required for standard builds.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?