NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Replace Power
A 420W ATX power supply compatible with HP Media Center models, providing SATA and multiple peripheral connectors with switchable 110V or 220V input
This 420W ATX power supply replaces the original unit in HP Media Center models a1206n, m7077c, m7360n, a1430n, m8050br and m1082n. It fits standard ATX mounting points and uses a switchable 110V/220V input for worldwide mains compatibility. The grey enclosure houses a single cooling fan. It is built for owners of those specific HP desktops who need a direct swap.
The unit provides a 15-inch SATA connector, a 14-inch 20+4 pin ATX motherboard plug, a 14-inch 12V ATX plug, two 15-inch large peripheral connectors, two 6-inch large peripheral connectors and one 6-inch small peripheral connector. Cable lengths range from 6 to 15 inches to reach drives and motherboard headers in typical mid-tower chassis. A single 80mm fan handles airflow. Builders working in very compact cases should verify clearances before ordering.
The 420W maximum output is the single figure that determines whether this unit can support your installed components. Add the rated draw of your CPU, graphics card, drives and expansion cards; if the total approaches or exceeds 420W, a higher-capacity supply is required. No other specification in the data overrides this limit.
| Brand | Replace Power |
|---|---|
| Model | RPSU-C99-25 |
| Color | Grey |
| Type | ATX |
| Fans | 1 |
| Weight | 0.1 |
It supplies a 14-inch 20+4 pin ATX connector and a 14-inch 12V ATX connector for motherboard power.
The unit fits a standard ATX bay; the single 80mm fan exhausts at the rear and the grey casing matches typical mounting points.
Slide the 110V/220V switch to match your mains voltage, then secure the unit with four screws and attach the 20+4 pin, 12V, SATA and peripheral cables.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?