BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027802BTC
Skladom
RIMLANCE
RIMLANCE RUD14900LD8C2K16 16GB (2x8GB) DDR3 1866 CL13 1.35V desktop RAM
A 16GB dual-channel DDR3 kit with two 240-pin 8GB modules running at 1866MHz CL13 on 1.35V
- Capacity16GB (2 x 8GB)
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor Brand Chipset
- 16 GB dual-channel kit expands multitasking headroom
- 1866 MHz DDR3 data rate accelerates everyday workloads
- CL13 latency tightens response times
- 35 V operation reduces power draw
- 240-pin UDIMM form factor fits standard desktop slots
16GB dual-channel DDR3 kit
This 16GB kit contains two 8GB unbuffered UDIMM modules rated at DDR3 1866 (PC3-14900) with a CAS latency of 13. They operate at the standard 1.35 V and use 240-pin connectors for desktop motherboards that support DDR3 memory.
Suits DDR3 desktop upgrades only
Builders repairing or upgrading older desktop platforms that require DDR3 1866 modules will find the speed and capacity match. Systems needing registered or ECC memory, higher frequencies, lower latencies, or any DDR generation beyond DDR3 cannot use this kit.
1866 MHz DDR3 data rate
The decisive specification is the 1866 MHz DDR3 rating (PC3-14900); the motherboard and CPU memory controller must both support this exact speed and voltage for the modules to function at their rated performance.
Prednosti
- 16 GB dual-channel kit expands multitasking headroom
- 1866 MHz DDR3 data rate accelerates everyday workloads
- CL13 latency tightens response times
- 35 V operation reduces power draw
- 240-pin UDIMM form factor fits standard desktop slots
Špecifikácie
| Brand | RIMLANCE |
|---|---|
| Model | RUD14900LD8C2K16 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
Otázky k tomuto produktu
Will the 1.35 V DDR3 modules need any special cooling or replacement after long daily use?
The kit runs at the standard 1.35 V for DDR3 1866 and uses unbuffered 240-pin UDIMMs, so no extra cooling is required beyond normal case airflow and the modules have no user-serviceable parts to replace.
What limit appears first when the 1866 MHz CL13 kit runs sustained heavy workloads?
The memory controller and the CL13 timing at 1866 MHz set the practical bandwidth ceiling, so sustained throughput is capped by that rated speed and latency combination.
How much heat or noise do the two 8 GB sticks add when the system runs all day?
Operating at 1.35 V without ECC or registered buffers keeps power draw low, so the modules add minimal heat and produce no audible noise of their own.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
