SAMSUNG
SAMSUNG 870 QVO SATA III SSD 8TB 2.5" Internal Solid State Drive Upgrade Desktop PC
An 8 TB 2.5 inch SATA solid-state drive with sequential speeds up to 560 MB/s read and 530 MB/s write and a 2,880 TBW endurance rating
- Device TypeInternal Solid State Drive (SSD)
- Form Factor2.5"
- Capacity8TB
- Memory ComponentsQLC
- InterfaceSATA III
- 8 TB capacity stores massive media libraries
- SATA III interface delivers 560 MB/s sequential reads
- QLC technology enables the 8 TB density
- 2,880 TBW endurance rating supports heavy write workloads
- 5 inch form factor fits standard laptop and desktop bays
Capacity and audience
This 8TB SATA solid-state drive uses QLC memory to deliver very high capacity in a standard 2.5 inch form factor. It is aimed at desktop and laptop owners who need a single large volume for media libraries, project archives or general storage expansion.
Build and daily use
The drive connects through a regular SATA III port and fits any 2.5 inch bay or caddy without special brackets. Sequential reads reach 560 MB/s and writes 530 MB/s, while Intelligent TurboWrite uses a variable buffer to keep sustained performance steady during large transfers.
Compatibility check
Verify that your system has a free SATA data port and a matching power connector from the supply. The 2.5 inch height is the common 7 mm profile, so confirm the laptop or enclosure can accept that thickness before ordering. The rated endurance is 2880 TBW, which is double the previous 1440 TBW figure for this series.
Prednosti
- 8 TB capacity stores massive media libraries
- SATA III interface delivers 560 MB/s sequential reads
- QLC technology enables the 8 TB density
- 2,880 TBW endurance rating supports heavy write workloads
- 5 inch form factor fits standard laptop and desktop bays
Špecifikácie
| Device Type | Internal Solid State Drive (SSD) |
|---|---|
| Form Factor | 2.5" |
| Capacity | 8TB |
| Memory Components | QLC |
| Interface | SATA III |
Otázky k tomuto produktu
What sequential read and write speeds does the SATA III interface on the 870 QVO 8TB deliver?
The SATA III interface reaches up to 560 MB/s sequential read and 530 MB/s sequential write on this 8TB model.
What physical space is required to install the 2.5 inch 8TB drive?
The drive uses a standard 2.5 inch form factor and fits any 2.5 inch bay or laptop caddy that accepts a 2.5 inch SATA SSD.
What is the correct order to connect the SATA data and power cables when installing the 870 QVO?
Attach the SATA data cable to the motherboard and drive first, then connect the SATA power cable from the power supply; reversing the order can prevent the drive from being detected on first boot.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
