Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board with M.2 slot and eSATA port

Shenzhen Aimilai Technology Co.Ltd.

Shenzhen Aimilai Technology Co.Ltd. M.2 B-key SATA to eSATA Adapter 2230-2280

SKU CH-W7PS-RE3BA

Converts an M.2 B-key SATA SSD to a SATA3 connection and supports 2230, 2242, 2260, and 2280 form factors

  • TypePCI Express to eSATA Card
  • Use standard M.2 B-key SATA SSDs via eSATA
  • Supports 2230, 2242, 2260 and 2280 form factors
  • Powered by 3.3 V from the PCIe slot
  • Includes SATA cable and mounting screws
  • Quick start guide for easy installation

M.2 B-key SATA to eSATA adapter

This new adapter from Shenzhen Aimilai Technology Co.Ltd. converts a standard M.2 B-key SATA SSD into a SATA3 connection. It fits M.2 modules in 2230, 2242, 2260 and 2280 dimensions. The card draws 3.3 V power directly from the PCIe slot and includes a SATA cable, two mounting screws and a screwdriver.

Builders adding SATA M.2 storage to a desktop

The board suits anyone who wants to reuse a B-key SATA M.2 drive in a system with a free PCIe slot and SATA port. It will not accept M-key PCIe-based SSDs, so buyers with that module type need a different solution. No driver installation is mentioned in the supplied data.

B-key SATA protocol limitation

The single deciding specification is that the adapter only supports M.2 B-key drives using the SATA bus. An M-key PCIe SSD will not function with this card. Confirm your drive keying and protocol before purchase.

Prednosti

  • Use standard M.2 B-key SATA SSDs via eSATA
  • Supports 2230, 2242, 2260 and 2280 form factors
  • Powered by 3.3 V from the PCIe slot
  • Includes SATA cable and mounting screws
  • Quick start guide for easy installation

Špecifikácie

TypePCI Express to eSATA Card

Otázky k tomuto produktu

Does the adapter run at SATA3 speed or is it limited by the PCIe slot?

The card converts a B-key M.2 SATA SSD to a standard SATA3 connection, so the drive runs at SATA3 speed.

Which M.2 lengths fit the 2230-2280 bracket?

The board accepts 2230, 2242, 2260 and 2280 B-key SATA SSDs.

Do I need an external power cable for the 3.3 V supply?

No, 3.3 V comes from the PCIe slot; just secure the SSD with the supplied screws and connect the included SATA cable.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.