Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Rectangular green circuit board with gold edge connector and black controller chips

Solidigm

Solidigm D7-P5520 1.92TB E1.S 15mm enterprise SSD SSDPFVKX019T11Z

SKU CH-4EY4-YD4D6 MPN SSDPFVKX019T11Z

E1.S 15mm enterprise SSD with 1.92TB 144L TLC 3D NAND, PCIe 4.0 x4, up to 5300 MBps read and 1900 MBps write, 706000 random read IOPS, 3.5 PBW endurance

  • Form FactorE1.S 15mm
  • Capacity1.92TB
  • Memory Components144L TLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 5300 MBps
  • Max Sequential WriteUp to 1900 MBps

Option 1.92TB E1.S 15mm

Zobraziť ďalších 7 konfigurácií
  • High sequential read speed up to 5300 MBps for fast data access
  • High random read performance at 706000 IOPS for responsive workloads
  • Enterprise endurance of 3.5 PBW for sustained write operations
  • Compact E1.S 15mm form factor fits dense server deployments
  • High reliability with 2000000 hours MTBF for continuous operation

Solidigm D7-P5520 1.92TB E1.S enterprise SSD

The Solidigm D7-P5520 is a 1.92TB enterprise solid-state drive built on 144L TLC 3D NAND with a PCI-Express 4.0 x4 interface. It delivers up to 5300 MBps sequential read and 1900 MBps sequential write, with 706000 IOPS random read and 114000 IOPS random write. Endurance is rated at 3.5 PBW and MTBF at 2,000,000 hours. It targets data-centre servers that need high-density read-intensive storage in the E1.S 15mm form factor.

Check E1.S 15mm bay and PCIe 4.0 support before

Verify that your server chassis provides an E1.S 15mm drive bay and that the backplane or riser connects it to a PCI-Express 4.0 x4 link. The drive draws up to 13W active and 5W idle, so confirm the slot power budget and thermal design can handle that load. No Opal encryption is supported, so encryption must be handled at the controller or software layer. Ensure firmware and driver stacks are qualified for Solidigm D7-P5520 SSDPFVKX019T11Z.

Thermals noise and power in normal operation

Active power peaks at 13W and idle power sits at 5W, so the drive relies on system airflow through the E1.S bay for cooling. It has no moving parts, making it silent in operation. The unit is rated for 1,000 G shock at 0.5 msec and 2.17 GRMS operating vibration from 5 to 700 Hz, with 3.13 GRMS non-operating from 5 to 800 Hz. Weight is 84g ± 5g.

Prednosti

  • High sequential read speed up to 5300 MBps for fast data access
  • High random read performance at 706000 IOPS for responsive workloads
  • Enterprise endurance of 3.5 PBW for sustained write operations
  • Compact E1.S 15mm form factor fits dense server deployments
  • High reliability with 2000000 hours MTBF for continuous operation

Špecifikácie

BrandSolidigm
ModelD7-P5520
Part NumberSSDPFVKX019T11Z
Form FactorE1.S 15mm
Capacity1.92TB
Memory Components144L TLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 5300 MBps
Max Sequential WriteUp to 1900 MBps
4KB Random Read706000 IOPS (4K Blocks)
4KB Random Write114000 IOPS (4K Blocks)
Endurance3.5 PBW
MTBF2,000,000 hours
Power Consumption (Idle)5W
Power Consumption (Active)13W
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight84g +/- 5g
Prepravná hmotnosť0.17 kg
Rozmery balenia140 × 110 × 17 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the E1.S 15mm D7-P5520 arrive with a heatsink or mounting bracket, or must I source those separately?

The drive ships as a bare E1.S 15mm module weighing 84g. Heatsinks and retention hardware are not included and must be sourced to match your server chassis.

Is the 1.92TB capacity the right choice for write-heavy workloads compared to other D7-P5520 sizes?

This 1.92TB model delivers 3.5 PBW endurance and 114000 4KB random write IOPS. Larger capacities in the same series typically scale endurance and write IOPS higher.

Will the quoted 5300 MBps sequential read hold up inside a PCIe 4.0 x4 server slot under sustained load?

The 5300 MBps figure is the vendor-rated maximum over PCIe 4.0 x4. Sustained throughput depends on workload mix, queue depth and the thermal limits of your specific enclosure.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.