Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
E3.S 7.5mm enterprise SSD with green circuit board and gold edge connector

Solidigm

Solidigm SBFPFABU076T001 D5-P5430 7.68TB E3.S 7.5mm PCIe 4.0 enterprise SSD

SKU CH-T237-CNA1T MPN SBFPFABU076T001

E3.S 7.5mm PCIe 4.0 enterprise SSD with 7.68TB of 192L QLC 3D NAND, rated for 2,000,000 hours MTBF

  • Form FactorE3.S 7.5mm
  • Capacity7.68TB
  • Memory Components192L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • MTBF2,000,000 hours
  • Operating Temperature0°C ~ +70°C

Option 7.68TB E3.S

Zobraziť ďalších 14 konfigurácií
  • 68TB capacity supports dense read-heavy workloads
  • E3.S 7.5mm form factor fits high-density server bays
  • PCI-Express 4.0 interface delivers high-throughput data transfer
  • 192L QLC 3D NAND enables cost-efficient large-scale storage
  • 2,000,000-hour MTBF ensures long-term operational reliability

Solidigm D5-P5430 7.68TB E3.S enterprise SSD

This Solidigm D5-P5430 drive delivers 7.68TB of capacity in the E3.S 7.5mm form factor for read-intensive data-centre workloads. It uses 192L QLC 3D NAND and a PCI-Express 4.0 x4 interface. The design targets servers and storage arrays that need high density with consistent endurance.

E3.S 7.5mm build with hot-plug capability

The 7.5mm E3.S form factor fits standard enterprise drive bays and supports tool-less hot-plug installation. A 2,000,000-hour MTBF rating reflects the robust construction. The drive withstands 1,000 G shock at 0.5 msec and meets 2.17 GRMS operating vibration plus 3.13 GRMS non-operating vibration across the specified frequency ranges.

QLC media suited to read-heavy workloads

The 192L QLC 3D NAND provides the capacity required for large-scale data storage where write cycles are limited. Buyers who need sustained high-write performance or hardware-based encryption should evaluate alternative media types. The drive operates reliably between 0°C and 70°C.

Prednosti

  • 68TB capacity supports dense read-heavy workloads
  • E3.S 7.5mm form factor fits high-density server bays
  • PCI-Express 4.0 interface delivers high-throughput data transfer
  • 192L QLC 3D NAND enables cost-efficient large-scale storage
  • 2,000,000-hour MTBF ensures long-term operational reliability

Špecifikácie

BrandSolidigm
SeriesD5-P5430
ModelD5-P5430
Form FactorE3.S 7.5mm
Capacity7.68TB
Memory Components192L QLC 3D NAND
InterfacePCI-Express 4.0
MTBF2,000,000 hours
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Prepravná hmotnosť2.80 kg
Rozmery balenia339 × 201 × 134 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What bandwidth does the PCIe 4.0 x4 interface cap this drive at?

PCIe 4.0 x4 provides up to 8 GB/s theoretical bandwidth; actual throughput depends on the host controller and workload.

Which server bays accept the E3.S 7.5mm form factor?

Any E3.S 7.5mm hot-plug bay with the standard EDSFF connector and 7.5 mm thickness clearance.

How is the drive installed, and what step is often missed?

Slide the drive into the E3.S bay until the latch clicks; the step often missed is fully engaging the latch to secure power and data contact.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.