Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Three black 120mm case fans with double ARGB rings and thick frames, shown with a controller hub

Super Flower

Super Flower Hyperlink HL120 ARGB Black 120mm 3-pack case fan

SKU CH-TXSK-Q2HQ7

Three 120mm ARGB case fans with fluid-dynamic bearings, 1800 RPM airflow and a magnetic interlock frame that cuts cable clutter

  • Fan Size120mm
  • LEDARGB
  • TypeCase Fan
  • Bearing TypeFluid Dynamic Bearing
  • RPM1800 ± 200 RPM
  • Air Flow65-70 CFM
  • Magnetic frame locks fans together securely
  • Push-button connection cuts cable clutter
  • 5V ARGB sync creates unified lighting
  • 30mm thick frame delivers 65-70 CFM airflow
  • Fluid dynamic bearing runs at 25-30 dBA

Magnetic Frame 120mm ARGB Fans

A three-fan pack built around Super Flower's Hyperlink series with 120mm frames and addressable RGB lighting. The fluid dynamic bearing supports speeds up to 1800 ± 200 RPM while moving 65-70 CFM at 25-30 dBA. Each unit measures 30mm thick and carries a 2.4 mmH₂O static pressure rating. The set targets builders who want coordinated lighting and simplified wiring in a single purchase.

Interlock Frame With Integrated Hub

Magnetic frames on each fan snap together side-by-side, removing the need for separate screw mounts between adjacent units. One face carries a 5V ARGB header and the opposite face a 12V power connection, so a single daisy-chain feeds both signal and power. The included controller hub consolidates the leads, reducing cable count behind the motherboard tray. A push-button release on each frame lets you separate fans without tools.

Limits Of 5V ARGB Daisy-Chain

The 5V ARGB link passes data through each fan in series, so a single broken LED or loose connector can darken the rest of the chain. Motherboard headers typically cap current at 2-3 A, restricting how many additional devices you can add downstream. The 12V power rail is shared across the daisy-chain, meaning total fan count is bounded by that header's wattage limit. Builders needing more than three fans on one header must verify their board's rated output before expanding.

Prednosti

  • Magnetic frame locks fans together securely
  • Push-button connection cuts cable clutter
  • 5V ARGB sync creates unified lighting
  • 30mm thick frame delivers 65-70 CFM airflow
  • Fluid dynamic bearing runs at 25-30 dBA

Špecifikácie

BrandSuper Flower
SeriesHyperlink
Fan Size120mm
LEDARGB
TypeCase Fan
Bearing TypeFluid Dynamic Bearing
RPM1800 ± 200 RPM
Air Flow65-70 CFM
Noise Level25 - 30 dBA
ColorBlack
CompatibilityCase
Fan Counts3 Fans
Fan ControllerController
Fan Thickness30mm
Air Pressure2.4

Otázky k tomuto produktu

What ARGB interface does the Hyperlink HL120 use and what does it cap in practice?

It uses a 5V ARGB header and syncs with motherboard software, capping colour control to 5V addressable RGB standards.

What clearance does the 30mm thick frame need to mount in a case?

Each fan is 30mm thick, so the case must provide at least 30mm depth at every mounting point for the three-fan pack.

How do you install the magnetic interlock and which step is often missed?

Snap the magnetic frames together, connect the 12V power link on one side and the 5V ARGB link on the other, then plug the hub into a 5V ARGB header — the ARGB link is the step most often forgotten.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.