Supermicro
Supermicro MBD-X12SAE-5-B server motherboard LGA 1200 Intel W580 ATX
ATX server board with LGA 1200 socket, Intel W580 chipset, four DDR4 3200 slots up to 128 GB ECC, two PCIe 4.0 x16 slots, three M.2 sockets, and dual Intel 1 GbE LAN
- CPU Socket TypeLGA 1200
- CPU TypeSupports 11th Generation Intel Core i5/i7/i9 Processors, Int
- North BridgeIntel W580
- Number of DDR4 Slots4 x 288-pin
- DDR4 StandardDDR4 3200
- Maximum Memory Supported128GB
- Supports 10th and 11th Gen Intel Core and Xeon W processors via LGA 1200 socket
- Intel W580 chipset provides workstation-class platform features
- Four DDR4 3200 slots with ECC support up to 128 GB for data integrity
- Two PCIe 4.0 x16 slots configurable as 16/0 or 8/8 plus two PCIe 3.0 x1 for expansion
- One PCIe 4.0 x4 and two PCIe 3.0 x4 M.2 interfaces with RAID 0 and 1 support
Product identity
The Supermicro MBD-X12SAE-5-B is an ATX server motherboard built around the Intel W580 chipset and LGA 1200 socket. It supports 10th and 11th Generation Intel Core i5, i7, i9 processors as well as Xeon W-1200 and W-1300 series CPUs. The board provides four 288-pin DDR4 slots running at 3200 with ECC capability up to 128GB.
Fit and alternatives
This board suits builders assembling single-socket workstations or entry servers that need ECC memory and PCIe 4.0 x16 expansion. It is not for systems requiring dual-socket scaling, registered DIMM capacity beyond 128GB, or onboard networking faster than 1Gbps.
Deciding specification
The Intel W580 chipset defines the platform: it enables PCIe 4.0 lanes for two x16 slots configurable as 16/NA or 8/8, one M.2 PCIe 4.0 x4 with RAID 0/1, two M.2 PCIe 3.0 x4, and dual 1GbE LAN via Intel I219LM and i225V controllers.
Prednosti
- Supports 10th and 11th Gen Intel Core and Xeon W processors via LGA 1200 socket
- Intel W580 chipset provides workstation-class platform features
- Four DDR4 3200 slots with ECC support up to 128 GB for data integrity
- Two PCIe 4.0 x16 slots configurable as 16/0 or 8/8 plus two PCIe 3.0 x1 for expansion
- One PCIe 4.0 x4 and two PCIe 3.0 x4 M.2 interfaces with RAID 0 and 1 support
Špecifikácie
| Brand | SUPERMICRO |
|---|---|
| Model | MBD-X12SAE-5-B |
| CPU Socket Type | LGA 1200 |
| CPU Type | Supports 11th Generation Intel Core i5/i7/i9 Processors, Intel Xeon W-1300 Processors, Intel Xeon W-1200 Processors, 10th Generation Intel Core i9/Core i7/Core i5/Core i3 Processor |
| North Bridge | Intel W580 |
| Number of DDR4 Slots | 4 x 288-pin |
| DDR4 Standard | DDR4 3200 |
| Maximum Memory Supported | 128GB |
| ECC Supported | Yes |
| PCI Express 4.0 x16 | 2 PCI-E 4.0 x16 slots (16/NA or 8/8), |
| PCI Express x1 | 2 PCI-E 3.0 x1 |
| M.2 | M.2 Interface: 1 PCI-E 4.0 x4, RAID 0 & 1; 2 PCI-E 3.0 x4 |
| LAN Chipset | Intel PHY I219LM |
| LAN Speed | Intel i225V |
| Max LAN Speed | 1Gbps |
| Form Factor | ATX |
| Dimensions (W x L) | 12.0" x 9.6" |
| Prepravná hmotnosť | 1.81 kg |
| Rozmery balenia | 381 × 330 × 102 mm |
Otázky k tomuto produktu
Will the 12.0" x 9.6" ATX board fit my standard server chassis?
The board follows the ATX form factor at 12.0" x 9.6", so any chassis that accepts ATX motherboards with standard mounting holes will accommodate it.
What is the correct order for populating the four 288-pin DDR4 3200 slots to enable ECC?
Install matched DDR4 3200 ECC modules in the slots indicated by the silkscreen — typically the two slots closest to the CPU first, then the remaining pair — so the memory controller initialises all four channels.
When should the M.2 PCI-E 4.0 x4 slot be replaced or upgraded?
Replace the M.2 drive only if it fails SMART health checks or you need more capacity; the PCI-E 4.0 x4 interface itself is soldered to the board and does not wear out.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



