Synology Inc.
Synology Inc. SAT5210-480G 480GB 2.5" SATA internal SSD
2.5" SATA internal SSD with 480 GB of 3D NAND TLC, up to 530 MB/s read and 500 MB/s write, 1,097 TBW endurance and power-loss protection
- Used ForConsumer
- Form Factor2.5"
- Capacity480GB
- Memory Components3D NAND TLC
- InterfaceSATA III
- ProtocolSATA
- Fast sequential reads up to 530 MBps for responsive system boot
- High random read IOPS of 96,000 for snappy application loading
- Endurance rated at 1,097 TBW for long service life
- Low idle power draw of 1.3 W reduces energy use
- MTBF of 1.5 million hours signals high reliability
2.5" SATA SSD for mixed workloads
The Synology SAT5210-480G is a 2.5-inch internal solid-state drive with a 480GB capacity and a SATA III interface. It uses 3D NAND TLC memory and delivers sequential reads up to 530 MBps and writes up to 500 MBps. Random 4K performance reaches 96,000 read IOPS and 55,000 write IOPS for consistent I/O handling.
Suited for Synology NAS and 24/7 enterprise tasks
This drive targets intensive mixed workloads such as online transaction processing databases and virtualization on compatible Synology systems. End-to-end data protection and a power loss protection circuit guard data integrity during unexpected outages. It is not intended for consumer laptops or desktops needing a basic boot drive.
1,097 TBW endurance rating
The terabytes written figure of 1,097 TBW defines how much data can be written over the drive's warranted life. A 1.5 million hour MTBF and an operating range of 0°C to 70°C support continuous operation. Buyers with higher write-volume requirements should verify the TBW against their workload profile.
Prednosti
- Fast sequential reads up to 530 MBps for responsive system boot
- High random read IOPS of 96,000 for snappy application loading
- Endurance rated at 1,097 TBW for long service life
- Low idle power draw of 1.3 W reduces energy use
- MTBF of 1.5 million hours signals high reliability
Špecifikácie
| Brand | Synology |
|---|---|
| Model | SAT5210-480G |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 480GB |
| Memory Components | 3D NAND TLC |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 530 MBps |
| Max Sequential Write | Up to 500 MBps |
| Sustained Random 4KB Read | 96,000 IOPS |
| Sustained Random 4KB Write | 55,000 IOPS |
| Terabytes Written (TBW) | 1,097 TB |
| MTBF | 1.5 million hours |
| Power Consumption (Idle) | 1.3 W |
| Power Consumption (Active) | 2.8 W |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) |
| Height | 7.00mm |
| Width | 69.85mm |
| Depth | 100.00mm |
| Prepravná hmotnosť | 0.10 kg |
| Rozmery balenia | 152 × 114 × 8 mm |
Otázky k tomuto produktu
What real-world speed does the 530 MBps sequential read figure deliver once the SAT5210-480G is installed?
In a typical system the drive sustains up to 530 MBps sequential reads and 500 MBps sequential writes, with 96,000 random read IOPS and 55,000 random write IOPS for mixed workloads.
How does the SATA III interface limit performance compared to newer standards?
The SATA III link caps throughput at roughly 600 MBps, so the drive’s 530 MBps read and 500 MBps write speeds sit near the interface ceiling without needing PCIe lanes.
Will the 7 mm height fit a standard laptop or server bay?
Yes, the 7 mm z-height matches the common 2.5-inch bay spec, and the 69.85 mm width aligns with standard drive caddies for laptops and servers.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
