Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two black square thermal pads 100x100x1.5mm

Thermal Grizzly

Thermal Grizzly Minus Pad Advance 100x100x1.5mm 2-Pack

SKU CH-8KC1-4XTXF

A 1.5 mm thick thermal interface pad in a two-pack, electrically non-conductive and sized 100 x 100 mm for SSDs, GPUs and other components

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Improved thermal conductivity for demanding components
  • Higher compressibility ensures full surface contact on uneven surfaces
  • Electrically non-conductive design prevents shorts on sensitive electronics
  • 100 x 100 mm sheets suit SSDs, GPUs and voltage regulators
  • 5 mm thickness matches common gap requirements

Thermal Pad for SSDs and GPUs

The Thermal Grizzly Minus Pad Advance is a 100x100mm thermal interface pad supplied as a 2-pack. Each black pad measures 1.5mm thick and is electrically non-conductive. It is designed to transfer heat from components such as SSDs, GPU coolers, voltage regulators and memory modules.

Suits builds needing conformable gap filling

The Advance series offers improved thermal conductivity and higher compressibility than the Basic variant, making it a good fit for uneven surfaces or mixed-height components on a graphics card or motherboard. Buyers who require the maximum conductivity and compressibility available in the range should look at the Pro series instead.

Check component clearance and thickness

Verify that a 1.5mm pad matches the gap between your cooler and the target chips; a different thickness may be required for optimal contact. Ensure the 100x100mm dimensions can be cut or applied to cover all necessary zones without overlapping adjacent circuitry.

Prednosti

  • Improved thermal conductivity for demanding components
  • Higher compressibility ensures full surface contact on uneven surfaces
  • Electrically non-conductive design prevents shorts on sensitive electronics
  • 100 x 100 mm sheets suit SSDs, GPUs and voltage regulators
  • 5 mm thickness matches common gap requirements

Špecifikácie

BrandThermal Grizzly
ModelTG-MP-A-100-100-15-2
Part NumberTG-MP-A-100-100-15-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Otázky k tomuto produktu

What size SSD or GPU cooler does the 100 x 100 mm pad cover?

The 100 x 100 mm pad covers most M.2 2280 SSDs and many GPU memory modules or voltage regulators in a single piece.

Will the 1.5 mm thickness compress enough for a GPU cooler with uneven contact surfaces?

The Advance series offers higher compressibility than the Basic pads, allowing the 1.5 mm material to conform to uneven surfaces on GPU coolers and water blocks.

How can I verify the pad is making proper contact after installation?

Check that the black pad material is evenly compressed across the component and that temperatures under load drop to expected levels for your SSD or GPU.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.