Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Three white 120mm fans with triple LED rings and controller

Thermaltake

Thermaltake Riing Trio White 120mm 30 LED 3-pack CL-F126-PL12SW-A

SKU CH-WMJD-Y6F9Y MPN CL-F126-PL12SW-A

Three 120 mm fans with 30 addressable LEDs across three independent rings, hydraulic bearings, 500–1500 RPM software control, 41.13 CFM airflow and 25.2 dBA noise

  • Fan Counts3 Fans
  • Fan ControllerController
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydraulic
  • Three independent LED rings with 30 addressable LEDs
  • 8 million colour spectrum across 21 lighting modes
  • Hydraulic bearing runs at 25.2 dBA for quiet cooling
  • Software-controlled 500–1500 RPM with PWM auto-adjust
  • USB 2.0 header controller links multiple fans together

Three-fan RGB kit for cases and radiators

This pack contains three 120 mm white case fans, each with three independent LED rings and 30 addressable LEDs. A digital controller connects via a USB 2.0 header and supports software control of both lighting and fan speed. The fans use hydraulic bearings and nine blades to deliver 41.13 CFM at up to 1500 RPM.

Who this suits and who should look elsewhere

Builders wanting synchronised ARGB lighting across a radiator or case interior with software profiles will appreciate the 21 preset modes and NeonMaker customisation. The pack is not for systems that lack a free USB 2.0 header or for installations where a single-fan or non-RGB cooler is preferred.

120 mm size with 25 mm thickness

Each fan measures 120 by 120 by 25 mm, the standard dimension for most 120 mm mounting points on cases and radiators. Verify that your chassis or radiator accepts 25 mm thick fans before purchasing.

Prednosti

  • Three independent LED rings with 30 addressable LEDs
  • 8 million colour spectrum across 21 lighting modes
  • Hydraulic bearing runs at 25.2 dBA for quiet cooling
  • Software-controlled 500–1500 RPM with PWM auto-adjust
  • USB 2.0 header controller links multiple fans together

Špecifikácie

BrandThermaltake
ModelCL-F126-PL12SW-A
Fan Counts3 Fans
Fan ControllerController
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydraulic
RPMSoftware Controlled 500 ~ 1500 RPM
Air Flow41.13 CFM
Noise Level25.2 dBA
Power ConnectorUSB 2.0 Header (From Controller)
ColorWhite
LEDARGB
Dimensions120.00 x 120.00 x 25.00 mm
Prepravná hmotnosť0.88 kg
Rozmery balenia188 × 160 × 97 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Do I need a spare USB 2.0 header on my motherboard for the controller to work?

Yes, the included controller connects to a USB 2.0 header and powers all three fans from that single connection.

Will the hydraulic-bearing fans fit a standard 120 mm radiator I already own?

The 120 mm square frame and 25 mm thickness match standard radiator mounting holes, so they bolt straight on.

How can I verify the 30 addressable LEDs are all functioning after installation?

Run TT RGB PLUS or NeonMaker and cycle through the 21 built-in modes; each of the three rings should show smooth colour transitions across all LEDs.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.