Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four black DDR3L UDIMM modules with gold edge connectors

Timetec

Timetec 32GB (4x8GB) DDR3L 1600MHz CL11 1.35V/1.5V 240-pin UDIMM desktop RAM

SKU CH-43YF-MQE0H

A 32 GB kit of four 8 GB DDR3L 1600 MHz CL11 240-pin UDIMM modules running at 1.35 V or 1.5 V

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • ColorBlack PCB

Capacity 32GB (4 x 8GB)

Speed DDR3L 1600

Color Black PCB

  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • Dual-voltage 1.35 V or 1.5 V operation fits DDR3L and DDR3 slots
  • 1600 MHz CL11 timing delivers responsive desktop performance
  • 240-pin UDIMM form factor installs in standard desktop DIMM sockets
  • Rigorously tested ICs ensure stability under heavy workloads

32GB DDR3L Kit for Desktop Upgrades

This Timetec kit delivers 32GB of DDR3L memory across four 8GB UDIMM modules. It runs at 1600MHz with a CAS latency of 11 and operates at either 1.35V or 1.5V. The dual-rank 2Rx8 modules use 240-pin connectors and are designed for desktop systems requiring DDR3L or DDR3 memory.

Replaces Older DDR3 or Lower-Capacity Kits

The jump is worth it when a system supports 1600MHz speed and needs more than 16GB total capacity for multitasking. It upgrades from slower 1333MHz modules or smaller 4GB sticks while maintaining JEDEC standard voltages. The dual-voltage design allows operation in both DDR3L and standard DDR3 slots without configuration changes.

Simple Installation With Standard UDIMM Fit

The 240-pin UDIMM form factor fits standard desktop DIMM slots and requires no tools beyond opening the case. Modules measure 133.4mm long and 30mm high for typical clearance. The main risk is mixing these 1600MHz CL11 sticks with existing 1333MHz CL9 modules, which forces the system to run at the slower speed and looser latency.

Prednosti

  • 32 GB capacity across four 8 GB modules expands multitasking headroom
  • Dual-voltage 1.35 V or 1.5 V operation fits DDR3L and DDR3 slots
  • 1600 MHz CL11 timing delivers responsive desktop performance
  • 240-pin UDIMM form factor installs in standard desktop DIMM sockets
  • Rigorously tested ICs ensure stability under heavy workloads

Špecifikácie

Capacity32GB (4 x 8GB)
SpeedDDR3L 1600 (PC3L 12800)
ColorBlack PCB

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 240-pin DDR3L UDIMM fit a standard desktop DIMM slot?

Yes, each 8 GB module uses the standard 240-pin UDIMM form factor and measures 133.4 mm long by 30 mm high, matching regular desktop DDR3 slots.

What is the correct way to seat all four modules and which step is often missed?

Align the notch on each stick with the slot key, press straight down until both side clips click, then verify in BIOS that all 32 GB are detected at 1600 MHz CL11.

When should I expect to replace or service this 32 GB kit?

DDR3L memory has no moving parts and requires no scheduled maintenance; replace only if a module fails or the platform is upgraded beyond DDR3 support.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.