Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Compact blue handheld laser engraver with rectangular base and safety shield

VEVOR

VEVOR Nano Pro 12W Portable Laser Engraver

SKU CH-SQN0-C7S7F

Handheld 12 W blue laser engraves wood, acrylic, leather and cloth at 5000 mm/s with 0.01 mm precision in a 100 × 100 mm area

  • TypeOther Appliances
  • Precise detail with 0.01 mm spot size
  • Fast workflow at 5000 mm/s engraving speed
  • Compact 100 x 100 mm working area
  • 12 W blue laser cuts wood and acrylic
  • 455 nm wavelength suits organic materials

Portable 12 W laser engraver

The VEVOR Nano Pro delivers a 12 W blue laser at 455 nm for engraving and cutting wood, acrylic, leather and cloth. Its 100 x 100 mm working area suits small desktop projects and hobbyist workshops. A 0.01 x 0.01 mm spot size enables fine detail on intricate designs. The unit is intended for makers who need a compact, high-speed tool.

Manual focus and open-frame design

The engraver requires manual focusing before each job, so the operator must set the correct working distance for the material. An open frame means no built-in enclosure; external ventilation and laser-safety eyewear are essential during operation. A stable, flat surface and a 12 W-compatible power source complete the minimal setup. The 5000 mm/s maximum speed reduces job time on lighter passes.

Accessory set and documentation included

The complete accessory set provides the mounting hardware and cable connections needed to start engraving immediately. A printed user manual covers assembly, focusing procedure and basic maintenance steps. No proprietary software licence or bundled design library is mentioned in the supplied data. Buyers who expect an enclosed safety cabinet or autofocus will need a different machine.

Prednosti

  • Precise detail with 0.01 mm spot size
  • Fast workflow at 5000 mm/s engraving speed
  • Compact 100 x 100 mm working area
  • 12 W blue laser cuts wood and acrylic
  • 455 nm wavelength suits organic materials

Špecifikácie

TypeOther Appliances

Otázky k tomuto produktu

How long can the 12W blue laser run continuously before thermal limits reduce power?

The 12W blue diode is rated for continuous operation at 5000 mm/s; sustained use will heat the module until its internal protection throttles output, so plan pauses for cooling.

What noise and heat levels should I expect from the 12W module during an all-day engraving session?

The unit uses a built-in fan to cool the 455 nm diode; expect audible airflow and warm exhaust, but no liquid-cooling loop is present, so surface temperatures rise after extended runs.

What must I already own to operate the Nano Pro engraver out of the box?

You need a computer with the control software installed, a USB cable for data, safety goggles rated for 455 nm Class 4 radiation, and a fire-resistant work surface.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.