Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Vszerda cooling fan for GS66 WS66 Stealth laptops

Vszerda

Vszerda CPU GPU Cooling Fan GS66 WS66 Stealth 10SD 10SE 10SF 10SFS 10SGS

SKU CH-6S2K-V20VF

CPU and GPU cooling fan for GS66 and WS66 Stealth laptops

  • Direct replacement for GS66 and WS66 Stealth models
  • Supports 10SD 10SE 10SF 10SFS 10SGS variants
  • Matches MS-16V1 BS5005HS-U4Q BS5005HS-U4J part numbers
  • Cools both CPU and GPU with single fan unit

Replacement cooling fan for GS66

This new case fan fits the GS66 and WS66 Stealth series including the 10SD, 10SE, 10SF, 10SFS and 10SGS models. It also matches the MS-16V1 chassis and the BS5005HS-U4Q and BS5005HS-U4J part numbers. The unit is designed to cool both the CPU and GPU in these specific machines. It serves owners who need a direct replacement for a worn or noisy original fan.

No bundled accessories

The package contains only the cooling fan itself; no mounting screws, thermal pads, cables or control software are supplied. Installers must reuse existing hardware or source compatible fixings separately. Buyers who need a complete service kit with screws and thermal material should look elsewhere. The fan is a standalone component for straightforward swap-in repairs.

Prednosti

  • Direct replacement for GS66 and WS66 Stealth models
  • Supports 10SD 10SE 10SF 10SFS 10SGS variants
  • Matches MS-16V1 BS5005HS-U4Q BS5005HS-U4J part numbers
  • Cools both CPU and GPU with single fan unit

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How often should the BS5005HS-U4Q or BS5005HS-U4J fan be cleaned or replaced in a GS66 Stealth?

Clean the fan every six to twelve months using compressed air to remove dust from the heatsink fins. Replace the unit if bearing noise appears or if temperatures rise above normal under load.

What thermal limit typically appears first during sustained loads on the 16V1-G-CW cooler?

The CPU or GPU will hit its factory temperature ceiling and throttle clock speeds before the fan reaches maximum RPM, so the silicon limit is reached before the cooler's airflow limit.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.