Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 120mm case fan with dual-ring ARGB lighting and daisy-chain connectors

XPG

XPG HURRICANE120ARGBPWM-BKCWW 120mm ARGB case fan

SKU CH-E135-EQKTD MPN HURRICANE120ARGBPWM-BKCWW

120 mm PWM case fan with dual-ring ARGB lighting, fluid-dynamic bearing, 61.5 CFM airflow and 18.17 dBA average noise

  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeFluid Dynamic
  • RPM600 ~ 2000 RPM ± 10%
  • PWM control adjusts speed from 600 to 2000 RPM
  • Fluid Dynamic Bearing runs at 18.17 dBA average noise
  • Dual-ring ARGB lighting with daisy-chain capability
  • 5 CFM airflow cools cases efficiently
  • 120 mm black frame fits standard 25 mm mounts

120 mm ARGB PWM case fan

The XPG Hurricane 120 mm fan delivers addressable RGB lighting through a dual-ring design that supports daisy-chaining for simplified cabling. A fluid dynamic bearing and dual-layer blade geometry provide 61.5 CFM airflow across a 600 to 2000 RPM range. Builders seeking coordinated lighting and straightforward PWM control will find the 4-pin connector compatible with standard motherboard headers.

Quiet operation at typical speeds

At lower RPM the fan produces an average noise level of 18.17 dBA, making it suitable for noise-sensitive builds. The fluid dynamic bearing reduces friction while the 3 or 4-pin power connector allows voltage or PWM regulation. No separate controller is included, so lighting and speed are managed directly through motherboard software or a compatible ARGB hub.

Sustained airflow under load

When the curve ramps toward 2000 RPM the dual-layer blades maintain 61.5 CFM to move heat through radiators or restricted mesh. The 25 mm thickness fits standard 120 mm mounting points without clearance surprises. Daisy-chain ARGB wiring keeps cable routing tidy even when multiple fans run continuously at higher duty cycles.

Prednosti

  • PWM control adjusts speed from 600 to 2000 RPM
  • Fluid Dynamic Bearing runs at 18.17 dBA average noise
  • Dual-ring ARGB lighting with daisy-chain capability
  • 5 CFM airflow cools cases efficiently
  • 120 mm black frame fits standard 25 mm mounts

Špecifikácie

BrandXPG
SeriesHurricane
ModelHURRICANE120ARGBPWM-BKCWW
Part Number75261025
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeFluid Dynamic
RPM600 ~ 2000 RPM ± 10%
Air Flow61.5 CFM
Noise Level18.17 dBA (avg.)
Power Connector3 / 4 Pin
ColorBlack
LEDARGB
FeaturesDual-Ring ARGB LED with Daisy Chain Capabilities
Dimensions120x120x25 mm
Prepravná hmotnosť0.45 kg
Rozmery balenia152 × 152 × 25 mm

Otázky k tomuto produktu

How do I connect the 4-pin PWM and daisy-chain multiple fans without a separate controller?

Plug the 4-pin PWM connector into a motherboard header for speed control and use the daisy-chain cable to link the next fan's ARGB and power in series.

When will the fluid dynamic bearing need replacement?

The fluid dynamic bearing is sealed for life; no lubrication or bearing swap is required during normal operation.

At what RPM does noise become noticeable under sustained load?

At the maximum 2000 RPM the fan averages 18.17 dBA, so sustained loads that push the speed toward that limit will be the first audible threshold.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.