Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black low-profile DDR5 RAM stick with RGB lighting strip

XPG

XPG Lancer Blade RGB DDR5 16GB 6000MHz AX5U6000C3016G-SLABRBK desktop RAM

SKU CH-TSPF-NQ4W2

Low-profile DDR5 desktop memory with 16 GB at 6000 MT/s, 7.86 mm height and RGB lighting controllable via motherboard software

  • Low-profile heatsink clears tower coolers and fits compact cases
  • 6000 MT/s tested speed with CL30 latency for responsive performance
  • RGB lighting syncs via motherboard software with multiple effects
  • 1 V SPD voltage reduces baseline power draw
  • 86 mm module height suits space-constrained builds

Compact Low-Profile DDR5 Memory

The XPG Lancer Blade RGB is a 16 GB DDR5 desktop module built for systems where clearance is tight. Its low-profile heatsink suits small-form-factor cases and avoids clashes with large tower CPU coolers. The black U-DIMM runs at a tested 6000 MT/s with a CAS latency of 30. SPD defaults are 4800 MT/s at 1.1 V and CL40-39-39-77.

Geometric Heatsink and RGB Control

The 7.86 mm tall heatsink uses sleek geometric lines that fit inside cramped builds while adding visual flair. Addressable RGB lighting offers static, breathing and comet effects plus a music-reactive mode. All effects are managed through the motherboard vendor’s own RGB control software, so no extra utilities are required. Operating temperature range is 0 °C to 85 °C.

Plug-and-Play Lighting Integration

The module draws power from the DIMM slot itself; no external cables or headers are needed. Lighting synchronisation works immediately with ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion and ASRock Polychrome Sync. SPD profiles at 4800 MT/s and 5600 MT/s provide fallback speeds if the platform cannot train at 6000 MT/s. Weight is 41.11 g.

Prednosti

  • Low-profile heatsink clears tower coolers and fits compact cases
  • 6000 MT/s tested speed with CL30 latency for responsive performance
  • RGB lighting syncs via motherboard software with multiple effects
  • 1 V SPD voltage reduces baseline power draw
  • 86 mm module height suits space-constrained builds

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

What is the SPD speed of this DDR5 module?

The SPD speed is 4800 MT/s, with a 5600 MT/s SKU also defined in the SPD table.

How tall is the heatsink, and will it clear a large CPU cooler?

The module height is 7.86 mm, making it a low-profile design that avoids interference with tower CPU coolers.

How do I enable the 6000 MT/s speed, and what mistake should I avoid?

Enable the XMP or EXPO profile in the BIOS; the common mistake is leaving the board at the default 4800 MT/s SPD speed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.