Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Square 120mm case fan with blue and white frame and ARGB lighting

YESTON

YESTON YT-120 Sakura 120mm ARGB Case Fan Quiet Edition Reverse Fan 1 Pack

SKU CH-2FE1-E2QX5

120 mm reverse-blade fan moves up to 79 CFM at 35–40 dBA with PWM 800–1800 RPM and addressable RGB lighting

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Air Flow79CFM(MAX)
  • Noise Level35 - 40 dBA
  • Power Connector4 Pin

Model Reverse Fan

Option 1 Pack

  • Quiet cooling at 35–40 dBA noise level
  • High airflow up to 79 CFM maximum
  • PWM speed control from 800 to 1800 RPM
  • ARGB lighting powered by 5 V LED supply
  • Reverse-blade design for flexible mounting options

120 mm reverse ARGB case fan

The Yeston YT-120 Sakura is a 120 mm reverse-blade fan built for cases, CPU coolers and radiators. It moves up to 79 CFM at a PWM range of 800 to 1800 RPM with a noise level of 35 to 40 dBA. Power comes from a 4-pin connector at 12 V for the motor and 5 V for the addressable RGB LEDs. The frame measures 120 by 120 by 25 mm.

Replaces standard intake fans for pull setups

A reverse fan pulls air through a radiator or heatsink instead of pushing it, which can improve clearance in tight builds. The jump is worth it when your cooler mounts on the opposite side of the fan or when cable routing blocks a conventional orientation. PWM control lets the curve match thermal load without manual switches.

Builders needing pull-configuration airflow

This unit suits anyone assembling a liquid-cooling loop or tower cooler that requires a pull fan. It also fits cases with restricted front-panel depth where a reverse blade avoids frame interference. Buyers who want more storage for drive bays or builders who need a second card for SLI should look at something else.

Prednosti

  • Quiet cooling at 35–40 dBA noise level
  • High airflow up to 79 CFM maximum
  • PWM speed control from 800 to 1800 RPM
  • ARGB lighting powered by 5 V LED supply
  • Reverse-blade design for flexible mounting options

Špecifikácie

BrandYeston
SeriesAir Series
ModelYT-120 Sakura
TypeCase Fan
CompatibilityCase
Fan Size120mm
Air Flow79CFM(MAX)
Noise Level35 - 40 dBA
Power Connector4 Pin
ColorBlue / White
LEDRGB

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Will the 120x120x25 mm frame fit my standard 120 mm fan mounts?

Yes, the 120 mm square frame and 25 mm thickness match the common mounting pattern used on most cases and radiators.

How do I connect the 4-pin PWM and 5 V ARGB cables so the fan spins and lights correctly?

Plug the 4-pin connector into a motherboard PWM header for 800–1800 RPM control and the 3-pin 5 V ARGB lead into a compatible 5 V addressable RGB header; reversing the ARGB plug is the common mistake.

When should I expect to clean or replace the fan given its 35–40 dBA rating?

Dust the blades every 6–12 months; the sleeve bearing typically runs several years at 800–1800 RPM before noise rises enough to warrant replacement.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.