BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.002756BTC
Skladom
YINGHUA
YINGHUA SDR Radio Development Board for HackRF One
Open-source SDR development board covering 1 MHz to 6 GHz with up to 20 Msps sampling, USB-powered half-duplex transceiver for HackRF One projects
- CPU TypeIntel Atom
- Covers 1 MHz to 6 GHz for wide spectrum access
- Half-duplex transceiver enables transmit and receive flexibility
- USB bus power simplifies portable deployment
- SMA clock I/O supports multi-board synchronisation
- Open-source platform allows custom firmware development
Platform Positioning
This YINGHUA board is a 1 MHz to 6 GHz software-defined radio development platform built around an Intel Atom processor and designed for the HackRF One project. It functions as a half-duplex transceiver with sample rates from 2 Msps to 20 Msps at 8-bit resolution. The board connects via High Speed USB using a Micro-B connector and draws power from the bus. It includes SMA female connectors for the antenna and clock ports plus pin headers for expansion.
Intended Users
Engineers and researchers developing or testing radio systems between 1 MHz and 6 GHz will find the open-source platform suitable for USB peripheral or stand-alone operation. Clock accuracy of 0.1 to 0.5 ppm supports synchronization work. Buyers who need full-duplex operation or sample rates above 20 Msps should look at other hardware.
Deciding Specification
The operating frequency range of 1 MHz to 6 GHz defines whether this board covers the bands required for a given project. Transmission power varies across the span: 5 to 15 dBm from 10 MHz to 2150 MHz, 13 to 15 dBm from 2150 MHz to 2750 MHz, 0 to 5 dBm from 2750 MHz to 4000 MHz, and -10 to 0 dBm from 4000 MHz to 6000 MHz.
Prednosti
- Covers 1 MHz to 6 GHz for wide spectrum access
- Half-duplex transceiver enables transmit and receive flexibility
- USB bus power simplifies portable deployment
- SMA clock I/O supports multi-board synchronisation
- Open-source platform allows custom firmware development
Špecifikácie
| CPU Type | Intel Atom |
|---|
Otázky k tomuto produktu
What host connection does the development board require to operate?
It connects via a High Speed USB interface using the USB Micro-B connector and draws power from the USB bus.
How does the board interact with external clock sources for synchronisation?
SMA female clock input and output ports are provided so the board can be synchronised with other equipment.
How can I verify the board is receiving signals after setup?
The receiver handles signals up to -5 dBm across the 1 MHz to 6 GHz range with a 20 MHz RF bandwidth.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
