Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Silver aluminium 2.5 inch SATA drive enclosure

Yottamaster

Yottamaster DR1C3-25 2.5" SATA Drive Enclosure 10Gbps Aluminium Silver

SKU CH-6YQK-RZA6A

Aluminium 2.5″ SATA enclosure with 10 Gbps USB 3.2 Type-C, UASP and TRIM support for drives up to 18 TB

  • ColorSilver
  • TypeEnclosure
  • MaterialAluminum
  • Internal InterfaceSATA I/II
  • External InterfaceSATA
  • HDD Count SupportedWithout RAID
  • 10 Gbps USB 3.1 Gen2 transfer with UASP acceleration
  • aluminium shell and meteor radiators dissipate drive heat
  • tool-free plug-and-play on Windows, Mac and Linux
  • fits 2.5" SATA drives 7–15 mm thick up to 18 TB
  • reversible Type-C port with included Type-A cable

Yottamaster DR1C3-25 2.5" SATA Enclosure

The Yottamaster DR1C3-25 is a 2.5 inch SATA drive enclosure built with a full aluminium shell for heat dissipation. It connects via USB 3.1 Gen2 Type-C to deliver up to 10Gbps transfer rates. The enclosure accepts 2.5 inch SATA HDDs or SSDs up to 18TB capacity and supports UASP protocol for improved throughput. No driver installation is required for Windows, Linux or Mac OS.

Suits single-drive external storage.

This enclosure suits users who want to turn a spare 2.5 inch SATA drive into portable external storage for backups, media libraries or creative project archives. The single-bay design does not support RAID configurations. Builders needing to install 3.5 inch desktop drives or multi-bay RAID arrays should look at a different form factor.

Internal SATA I/II interface limits maximum drive

The internal connection uses SATA I/II signalling, so the drive itself cannot exceed those speeds regardless of the 10Gbps USB link. Buyers fitting modern SATA III SSDs should expect the enclosure interface to be the bottleneck. This specification determines whether the product matches the performance needs of the installed drive.

Prednosti

  • 10 Gbps USB 3.1 Gen2 transfer with UASP acceleration
  • aluminium shell and meteor radiators dissipate drive heat
  • tool-free plug-and-play on Windows, Mac and Linux
  • fits 2.5" SATA drives 7–15 mm thick up to 18 TB
  • reversible Type-C port with included Type-A cable

Špecifikácie

BrandYOTTAMASTER
SeriesDR1C3-25
ModelM.2 SSD Enclosure
Part NumberDR1C3-25
ColorSilver
TypeEnclosure
MaterialAluminum
Internal InterfaceSATA I/II
External InterfaceSATA
HDD Count SupportedWithout RAID
Number of Bay1

Otázky k tomuto produktu

Should I pick the 7 mm, 9 mm, 12.5 mm or 15 mm bay for my 2.5 inch SATA drive?

The single bay accepts any 2.5 inch SATA HDD or SSD from 7 mm up to 15 mm thick, so you simply slide your drive in — no version choice is needed.

What does the 10 Gbps USB 3.1 Gen 2 rating mean once the enclosure is connected to my PC?

It sets the interface ceiling at 10 Gbps; real-world throughput depends on the host port, the cable and the drive itself, and UASP can add roughly 20 percent when both the computer and the drive support it.

The box includes a Type-A to Type-C cable rated at 5 Gbps — will that cap my transfer speed?

Yes, that cable limits the link to 5 Gbps; to reach the full 10 Gbps you need a USB 3.1 Gen 2 Type-C to Type-C cable and a host port that also supports 10 Gbps.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.