Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 80mm square case fan 38mm thick four-pin PWM connector

Zyvpee

Zyvpee 3115RL-04W-B96 80x38mm 12V 3.0A 4-pin PWM case fan

SKU CH-0EDB-CDZVE

An 80 mm case fan with dual-ball bearings, 4-pin PWM control and airflow above 80 CFM at over 7000 RPM

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • RPM>7000 RPM
  • Air Flow>80 CFM
  • Power Connector4 Pin
  • High airflow over 80 CFM for strong case cooling
  • Dual ball bearing design for extended operating life
  • PWM 4-pin control enables precise speed adjustment
  • 12 V 3.0 A rating supports high-performance operation
  • Compact 80 mm by 38 mm frame fits tight spaces

80mm 38mm thick case fan

The Zyvpee 3115RL-04W-B96 is an 80mm case fan with a 38mm thickness. It uses a 2 ball bearing and runs at over 7000 RPM to deliver more than 80 CFM of airflow. The black frame has no LED lighting. It is built for cases that accept this specific 80 by 80 by 38mm form factor.

Check 4-pin PWM header and 12V 3.0A capacity

Verify that your motherboard or fan controller provides a 4-pin PWM header for speed control. The fan draws 3.0A at 12V DC, so the header or controller must supply that current. Confirm the mounting holes match the 80mm square pattern and that the 38mm depth fits inside your chassis without fouling cables or other components.

Dual ball bearing handles high RPM thermals

The 2 ball bearing supports sustained operation above 7000 RPM while moving over 80 CFM. Expect audible airflow noise at these speeds in normal use. The 12V 3.0A power draw is significant for a single fan, so ensure your power distribution can accommodate the load. No LED means no extra lighting heat.

Prednosti

  • High airflow over 80 CFM for strong case cooling
  • Dual ball bearing design for extended operating life
  • PWM 4-pin control enables precise speed adjustment
  • 12 V 3.0 A rating supports high-performance operation
  • Compact 80 mm by 38 mm frame fits tight spaces

Špecifikácie

Series3115RL-04W-B96
Model3115RL-04W-B96
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
RPM>7000 RPM
Air Flow>80 CFM
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*38mm

Otázky k tomuto produktu

Does the 3115RL-04W-B96 include mounting screws or must I buy them separately?

The fan ships as the 80 mm 4-pin PWM unit only; mounting hardware is not included and must be sourced separately.

Should I choose the 12 V 3.0 A version or a lower-current model for my chassis?

This 3115RL-04W-B96 is a single 12 V 3.0 A variant; select it when your motherboard or fan header can supply up to 3.0 A for 7000 RPM operation.

What does the 80 CFM rating mean once the fan is installed in a case?

At over 7000 RPM the dual-ball bearing fan moves more than 80 CFM through an 80 x 38 mm frame, delivering high static pressure for restricted airflow paths.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.