Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Black 80 by 25 mm square case fan with two wires

Zyvpee

Zyvpee AUB0824VH 80mm 8025 DC24V 0.21A 2 Pin case fan

SKU CH-1YY3-0V6FT

An 80 mm square case fan with ball-bearing motor running on 24 V DC at 0.21 A via a 2-pin connector

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesInverter Cooling
  • 24 V 0.21 A rating for inverter cooling systems
  • Ball bearing construction extends operational lifespan
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Two-pin connector simplifies power installation
  • Non-LED black design keeps builds visually clean

80 mm DC 24 V case fan

The Zyvpee AUB0824VH is an 80 mm square frame fan built for 24 V DC systems such as inverter enclosures or industrial chassis. It draws 0.21 A through a two-pin power connector and uses a ball bearing for continuous operation. The non-LED black housing suits professional environments where indicator lights are unwanted.

Ball bearing and two-wire power

Ball bearing construction reduces wear compared with sleeve alternatives, supporting longer service intervals in 24-hour duty cycles. The two-pin connector delivers power without PWM control, so speed stays constant once voltage is applied. At 80 by 25 mm the frame fits standard 80 mm mounting holes, simplifying replacement in existing cut-outs.

Steady airflow with fixed voltage

Running directly from a 24 V rail eliminates the need for an onboard regulator, keeping power draw predictable at 0.21 A. Acoustic output remains consistent because the motor does not ramp under variable duty cycles. The compact 25 mm depth allows installation in shallow enclosures where taller coolers would interfere with adjacent components.

Prednosti

  • 24 V 0.21 A rating for inverter cooling systems
  • Ball bearing construction extends operational lifespan
  • 80 × 25 mm frame fits standard 80 mm mounts
  • Two-pin connector simplifies power installation
  • Non-LED black design keeps builds visually clean

Špecifikácie

Brand3ccooler.com
SeriesAUB0824VH
ModelAUB0824VH
TypeCase Fan
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions80*25mm

Otázky k tomuto produktu

Does the 2-pin connector on the AUB0824VH support PWM speed control?

No, the 2-pin connector provides only power and ground, so the fan runs at a fixed speed and cannot accept a PWM signal.

What clearance does the 80x25 mm frame of the AUB0824VH require inside the chassis?

The fan needs an 80 mm square mounting hole pattern and 25 mm of depth clearance behind the panel for the frame and wiring.

How do I connect the two wires of the AUB0824VH to a 24 V DC source without damaging the motor?

Connect the red wire to positive and the black wire to negative of a 24 V supply; reversing the polarity will prevent the fan from starting.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.